null
Fabtech

Fabtech 3" Uniball UCA System w/ Rear Stealth Shocks | For OEM Aluminum/Stamped Steel UCA | 14-18 Chevrolet/GMC 1500

(No reviews yet) Write a Review
SKU:
K1071M-FAB
Shipping:
Calculated at Checkout
$1,230.48

Description

This system offers a mild lift height with easy installation for clearance of 33" tall tires on GM C/K1500s.

Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range.

The arms are constructed of top quality material including .120” wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions.

The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles.

Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.

Tire Size - 33/12.50R17 Wheel Size - 17x8 w/ 4 1/2in BS w/minor trimming
Tire Size - 275/65R18 Wheel Size - 18x8 w/ 4 1/2in BS w/minor trimming
Tire Size - 295/55R20 Wheel Size - 20x9 w/ 5in BS w/minor trimming

Features

  • Increased ground clearance
  • Top quality Uniball Upper Control Arms for aggressive offroad use
  • 1" ID American made FK Uniballs with PTFE for ultimate strength
  • Increased fender clearance compared to a Leveling Kit for 33" tall tires
  • Suspension can be restored to stock

Notes


  • Will not fit models with Factory AutoRide shocks.
  • Will not fit all wheel drive models.
  • Cannot use OEM wheel and tire.
  • Does not fit standard cab.
  • This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).


This system offers a mild lift height with easy installation for clearance of 33" tall tires on GM C/K1500s.

Lift is accomplished by utilizing the factory front Coilover shocks with steel spacer system that helps retain the stock ride of the front suspension. The stock upper control arms are replaced with high quality tubular Uniball arms that allow unrestricted movement throughout the travel range.

The arms are constructed of top quality material including .120” wall 4130 Chromoly tubing with a 1.50" OD and 1" FK Stainless PTFE Uniballs. These arms are the best on the market for aggressive offroad driving in harsh conditions.

The front differential is relocated to keep CV angles proper with the new lift height while a 1/4" thick steel skid plate provides protection against offroad obstacles.

Rear lift is accomplished with 1 1/2" rear lift block and u-bolts to help level the stance of the vehicles. Performance rear shock absorbers replace the stock units for increased damping.

Tire Size - 33/12.50R17 Wheel Size - 17x8 w/ 4 1/2in BS w/minor trimming
Tire Size - 275/65R18 Wheel Size - 18x8 w/ 4 1/2in BS w/minor trimming
Tire Size - 295/55R20 Wheel Size - 20x9 w/ 5in BS w/minor trimming

Features

  • Increased ground clearance
  • Top quality Uniball Upper Control Arms for aggressive offroad use
  • 1" ID American made FK Uniballs with PTFE for ultimate strength
  • Increased fender clearance compared to a Leveling Kit for 33" tall tires
  • Suspension can be restored to stock

Notes


  • Will not fit models with Factory AutoRide shocks.
  • Will not fit all wheel drive models.
  • Cannot use OEM wheel and tire.
  • Does not fit standard cab.
  • This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).


View AllClose

Additional Information

View AllClose

Related Products

Related Products