null
Fabtech

Fabtech 5" Crawler Lift Kit W/ Dirt Logic 2.25 Resi Shocks (20-23 Jeep Gladiator JT)

(No reviews yet) Write a Review
SKU:
K4178DL-FAB
Shipping:
Calculated at Checkout
$5,478.10

Description

Fabtech's Crawlerlong arm Gladiator lift kit is built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further.

A key part of the Crawlerkit is the Link Arm geometry and ground clearance. The location of the of the link Armsis critical in providing superior handling throughout the travel range. Fabtech has found the Gladiator?s sweet spot geometry for the link Armsthat provide a superior driving long arm system compared to all others on the market.

Front link Armsare mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is key in not only in mounting the Links Armsat the correct geometry but it adds critical strength to the Gladiator frame for hard offroad use. Adjustable rear links utilize the factory frame and axle brackets for an easy installation.

The Fabtech lower Link Armsare massive and built of 2" OD .31" thick wall tubing that is guaranteed not to bend. Upper and lower Link Armsincludes the Fabtech's legendary 5 Ton Joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.

This high quality Long Arm Gladiator lift kit will provide exceptional offroad performance with good highway manners for the discerning Jeep enthusiast.

Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.

Features


  • Front Upper & Lower Link Arms/li>
  • Rear Upper & Lower Link Arms/li>
  • Front Link Arm Crossmember
  • Heavy Duty Flipped Draglink
  • Front & Rear Track Bar Brackets
  • Front & Rear Corner Specific Dual Rate Coil Springs
  • Front & Rear Sway Bar Links
  • Front Shock Mount Bracket
  • Front & Rear Bump Stop Extensions

Notes

 

  • Installation requires welding.
  • Fits 6 CYL. gas models only.
  • Exhaust modification required or order AFE P/N 48-48024 Loop Delete Pipe.
  • For heavy offroad use, front driveshaft is required. Order FTS94057.
  • For heavy offroad use, rear driveshaft is required. See a quality driveline supplier to order.
Fabtech's Crawlerlong arm Gladiator lift kit is built to meet the most experienced driver's expectations without having a questionably fabricated suspension. If you are in the market for a system that will work properly right out of the box and does not require continued fabrication and constant maintenance, look no further.

A key part of the Crawlerkit is the Link Arm geometry and ground clearance. The location of the of the link Armsis critical in providing superior handling throughout the travel range. Fabtech has found the Gladiator?s sweet spot geometry for the link Armsthat provide a superior driving long arm system compared to all others on the market.

Front link Armsare mounted to a full width crossmember that spans frame rail to frame rail. This crossmember is key in not only in mounting the Links Armsat the correct geometry but it adds critical strength to the Gladiator frame for hard offroad use. Adjustable rear links utilize the factory frame and axle brackets for an easy installation.

The Fabtech lower Link Armsare massive and built of 2" OD .31" thick wall tubing that is guaranteed not to bend. Upper and lower Link Armsincludes the Fabtech's legendary 5 Ton Joints that come with lifetime guarantee of never wearing out. They are superior for offroad use with a smooth quiet operation on the street.

This high quality Long Arm Gladiator lift kit will provide exceptional offroad performance with good highway manners for the discerning Jeep enthusiast.

Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.

Features


  • Front Upper & Lower Link Arms/li>
  • Rear Upper & Lower Link Arms/li>
  • Front Link Arm Crossmember
  • Heavy Duty Flipped Draglink
  • Front & Rear Track Bar Brackets
  • Front & Rear Corner Specific Dual Rate Coil Springs
  • Front & Rear Sway Bar Links
  • Front Shock Mount Bracket
  • Front & Rear Bump Stop Extensions

Notes

 

  • Installation requires welding.
  • Fits 6 CYL. gas models only.
  • Exhaust modification required or order AFE P/N 48-48024 Loop Delete Pipe.
  • For heavy offroad use, front driveshaft is required. Order FTS94057.
  • For heavy offroad use, rear driveshaft is required. See a quality driveline supplier to order.
View AllClose

Related Products

Related Products