null
Fabtech

Fabtech 6" Basic System | 15-16 Chevrolet/GMC 1500 SUV

(No reviews yet) Write a Review
SKU:
K1078-FAB
Shipping:
Calculated at Checkout
$3,155.39

Description

This system features our proven one piece high arched lower crossmember design with an integrated differential skid plate for solid support of the front suspension. Special attention was given to the design of replacement extended length steering knuckles to keep the track width of the vehicle near stock while retaining turning radius for easy maneuverability in tight areas. The rear system features extended length tubular upper and lower link arms with an oversized Trac bar relocation bracket to properly place the axle under the vehicle with zero driveline vibration. Rear coil springs maintain proper ride height. The Basic System also includes front strut assembly spacers and rear performance coil springs. This system provides a stock like ride and is compatible with all MagnaRide and Non MagnaRide models. This system qualifies for our 5/60 Powertrain Warranty.

Features


  • Everything You Will Need To Lift Your Vehicle
  • Utilizes The Stock Radius Arm
  • Designed For The Budget Minded Enthusiast

Notes


8. WILL NOT FIT ALL WHEEL DRIVE MODELS.
14. CAN NOT USE OEM WHEEL AND TIRE.
16. UTILIZES STOCK REAR SHOCKS.
101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.
132. WILL NOT FIT 2WD SUBURBAN.
134. WILL NOT FIT 2WD YUKON XL MODELS.
136. SOME VEHICLES MAY EXPERIENCE FRONT DRIVELINE VIBRATION ORDER FTS21192 CV DRIVESHAFT KIT.
(1) FTS21137: COMPONENT BOX 1
(1) FTS21138: 2014 GM 1500 6 in. SPACER KIT
(1) FTS21159: COMPONENT BOX 2 - SUV
(1) FTS21160: 2015 GM1500 6 in. SUV RR AUTO RD
This system features our proven one piece high arched lower crossmember design with an integrated differential skid plate for solid support of the front suspension. Special attention was given to the design of replacement extended length steering knuckles to keep the track width of the vehicle near stock while retaining turning radius for easy maneuverability in tight areas. The rear system features extended length tubular upper and lower link arms with an oversized Trac bar relocation bracket to properly place the axle under the vehicle with zero driveline vibration. Rear coil springs maintain proper ride height. The Basic System also includes front strut assembly spacers and rear performance coil springs. This system provides a stock like ride and is compatible with all MagnaRide and Non MagnaRide models. This system qualifies for our 5/60 Powertrain Warranty.

Features


  • Everything You Will Need To Lift Your Vehicle
  • Utilizes The Stock Radius Arm
  • Designed For The Budget Minded Enthusiast

Notes


8. WILL NOT FIT ALL WHEEL DRIVE MODELS.
14. CAN NOT USE OEM WHEEL AND TIRE.
16. UTILIZES STOCK REAR SHOCKS.
101. SOME MODELS MAY NOT SIT LEVEL AFTER INSTALL.
132. WILL NOT FIT 2WD SUBURBAN.
134. WILL NOT FIT 2WD YUKON XL MODELS.
136. SOME VEHICLES MAY EXPERIENCE FRONT DRIVELINE VIBRATION ORDER FTS21192 CV DRIVESHAFT KIT.
View AllClose

Additional Information

View AllClose