null
Fabtech

Fabtech 6" Basic System w/ Rear Performance Shocks | For OEM Forged Steel UCA | 14-18 Chevrolet/GMC 1500

(No reviews yet) Write a Review
SKU:
K1067-FAB
Shipping:
Calculated at Checkout
$2,439.05

Description

Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology.

Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac safety functions.

The front differential is relocated with heavy duty brackets while a tightly formed 1/4" thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Performance shocks for increase damping.

Features

  • Front lower control arm Crossmember forms to bottom of frame without cutting
  • Offset ductile Steering Knuckles keep tires under fenders
  • Includes Crossmember cross tubes to distribute front suspension impact loads
  • No disassembly of factory coilover assembly required for installation
  • Systems compatible with factory Stablitrac

Notes

  • Will not fit models with Factory AutoRide shocks.
  • Will not fit all wheel drive models.
  • Cannot use OEM wheel and tire.
  • Does not fit standard cab.
  • Some vehicles may experience front driveline vibration in 4WD. Order FTS21192 CV Driveshaft Kit if occurs.
  • Before ordering visually check your vehicle's factory suspension for aluminum or steel version.
  • This Kit will only fit vehicles equipped with factory (Cast Steel Control Arms).
(1) - COMPONENT BOX 1
(1) - COILOVER SPACER KIT
(1) - COMPONENT BOX 2
(2) - REAR PERFORMANCE SHOCK
Our 6" Basic System has been designed utilizing our industry leading crossmember and spindle technology.

Lift is accomplished by utilizing the factory front Coilover shocks with steel spacers that helps retain the stock ride of the front suspension. Extensive design work was given to the extended length steering knuckles specifically for the Steel component version keeping track width near stock and working properly with the Stablitrac safety functions.

The front differential is relocated with heavy duty brackets while a tightly formed 1/4" thick steel skid plate provides protection for offroad use. The rear suspension is upgraded with add a leafs and 5" tall blocks and u bolts. The stock rear shocks are replaced with Performance shocks for increase damping.

Features

  • Front lower control arm Crossmember forms to bottom of frame without cutting
  • Offset ductile Steering Knuckles keep tires under fenders
  • Includes Crossmember cross tubes to distribute front suspension impact loads
  • No disassembly of factory coilover assembly required for installation
  • Systems compatible with factory Stablitrac

Notes

  • Will not fit models with Factory AutoRide shocks.
  • Will not fit all wheel drive models.
  • Cannot use OEM wheel and tire.
  • Does not fit standard cab.
  • Some vehicles may experience front driveline vibration in 4WD. Order FTS21192 CV Driveshaft Kit if occurs.
  • Before ordering visually check your vehicle's factory suspension for aluminum or steel version.
  • This Kit will only fit vehicles equipped with factory (Cast Steel Control Arms).
View AllClose

Additional Information

View AllClose

Related Products

Related Products