Fabtech
Fabtech 6" Performance System Gen II w/ Front Dirt Logic SS 2.5 Coilover Resi & Rear Dirt Logic SS Shocks | For OEM Aluminum/Stamped Steel UCA | 14-18 Chevrolet/GMC 1500
- SKU:
- K1113DL-FAB
- Shipping:
- Calculated at Checkout
Description
This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced.
Features
- Heavy Duty 1/4" Thick, High Arched Crossmember
- Front Differential Skid Plate
- Ductile Iron Steering Knuckles
- Rear Block & U-bolt Kit
Notes
- Will not fit models with Factory AutoRide shocks.
- Will not fit all wheel drive models.
- Cannot use OEM wheel and tire.
- Does not fit standard cab.
- This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).
Notes
- Will not fit models with Factory AutoRide shocks.
- Will not fit all wheel drive models.
- Cannot use OEM wheel and tire.
- Does not fit standard cab.
- This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).
(1) - COMPONENT BOX 2 GEN II
(1) - FRONT DIRT LOGIC 2.5 COILOVERS W/ RESI
(2) - REAR DIRT LOGIC 2.25 NON RESI
This new Gen II system retains the factory track width keeping the tires under the fenders for a clean appearance. With the factory track width retained the front Sway Bar utilizes the stock end links and mounting holes keeping the leverage on the bar proper. There are no CV spacers, impact struts or add a leafs required for installation. The front differential is relocated in a manner so that when driving at higher 4 wheel drive speeds vibration is reduced.
Features
- Heavy Duty 1/4" Thick, High Arched Crossmember
- Front Differential Skid Plate
- Ductile Iron Steering Knuckles
- Rear Block & U-bolt Kit
Notes
- Will not fit models with Factory AutoRide shocks.
- Will not fit all wheel drive models.
- Cannot use OEM wheel and tire.
- Does not fit standard cab.
- This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).