null
ICON

Icon 2.5" Stage 1 Suspension System w/ Expansion Pack (2023 Ford F-250/F-350 | Gas)

(No reviews yet) Write a Review
SKU:
K62591L-ICN
Shipping:
Calculated at Checkout
$2,252.50

Description

The ICON 2.5" suspension system is a great way to lift your 4WD Ford F-250/F-350 Super Duty while improving ride quality and performance. This entry level system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON's Stage 1 System is comprised of dual rate coil springs optimized for trucks equipped with gasoline engines, alignment cams for adding caster, rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap, and ICON 2.0 Aluminum Series internal reservoir shocks front and rear. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.

Features

  • ICON engineered dual rate coil springs provide 2.5" of front lift over stock
  • Vehicle specific tuned internal reservoir 2.0 Aluminum Series shocks
  • Application specific alignment cams ensure proper caster alignment
  • Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
  • Increased wheel travel and improved ride quality over stock with no change in towing capacity
  • Less body-roll than stock
  • Lifetime guarantee that springs won't sag or break
  • No drive shaft modifications required
  • Shocks are fully rebuildable and re-tunable
  • 100% Bolt-on system - no drilling, cutting or welding necessary for install

Notes

  • OEM Wheels & Tires - Yes
  • Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" tires may fit but fender trimming and modifications will be required.)
  • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
  • An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
  • Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
  • Fits Single Rear Wheel Models Only
  • Springs Are Rated For Gasoline Engines
  • Lift Heights Based On 4WD Crew Cab Gas
  • Replaces OE rear blocks for .5" of rear lift over stock on F-250. Lowers F-350 rear ride height by .5" compared to stock.
  • Compatible with 4WD models only
  • Trucks equipped with Tremor package with have front lift height of 1.5" over stock
  • Not compatible with models equipped with OnBoard Scales
  • Not compatible with F-350 Cab & Chassis models
  • Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
  • ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
  • 62513 (QTY: 1) | FRONT 2.5" GAS DUAL RATE SPRING KIT
  • 66512 (QTY: 2) | 2.5" FRONT 2.0 VS IR
  • 66516 (QTY: 2) | REAR 0-2" 2.0 VS IR
  • 168507 (QTY: 2) | LEAF SPRING EXPANSION PACK
  • 67004 (QTY: 1) | REAR 12" U-BOLT KIT
  • 191201 (QTY: 1) | 1" CAST BLOCK KIT
  • 61002 (QTY: 1) | 2" REAR BUMP STOP SPACER KIT
The ICON 2.5" suspension system is a great way to lift your 4WD Ford F-250/F-350 Super Duty while improving ride quality and performance. This entry level system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON's Stage 1 System is comprised of dual rate coil springs optimized for trucks equipped with gasoline engines, alignment cams for adding caster, rear leaf spring expansion packs with blocks and U-bolts for a more compliant ride and reduced axle wrap, and ICON 2.0 Aluminum Series internal reservoir shocks front and rear. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.

Features

  • ICON engineered dual rate coil springs provide 2.5" of front lift over stock
  • Vehicle specific tuned internal reservoir 2.0 Aluminum Series shocks
  • Application specific alignment cams ensure proper caster alignment
  • Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
  • Increased wheel travel and improved ride quality over stock with no change in towing capacity
  • Less body-roll than stock
  • Lifetime guarantee that springs won't sag or break
  • No drive shaft modifications required
  • Shocks are fully rebuildable and re-tunable
  • 100% Bolt-on system - no drilling, cutting or welding necessary for install

Notes

  • OEM Wheels & Tires - Yes
  • Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" tires may fit but fender trimming and modifications will be required.)
  • Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5" Backspace / 6mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25" Backspace / 6mm Offset
  • Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25" Backspace / 6mm Offset
  • An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
  • Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
  • Fits Single Rear Wheel Models Only
  • Springs Are Rated For Gasoline Engines
  • Lift Heights Based On 4WD Crew Cab Gas
  • Replaces OE rear blocks for .5" of rear lift over stock on F-250. Lowers F-350 rear ride height by .5" compared to stock.
  • Compatible with 4WD models only
  • Trucks equipped with Tremor package with have front lift height of 1.5" over stock
  • Not compatible with models equipped with OnBoard Scales
  • Not compatible with F-350 Cab & Chassis models
  • Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
  • ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
View AllClose

Related Products

Related Products