ICON
ICON 3" Hanger System (00-05 Ford Excursion)
- SKU:
- K43000-99-ICN
- Shipping:
- Calculated at Checkout
Description
This 3" system is designed to lift your Ford Excursion 3" in front to provide room for 33 tires. This system drops your stock springs 3", which allows for lift while maintaining the stock spring rate. This system comes with a 1" bump stop spacer (not pictured) to prevent spring fatigue during the suspension cycle. This system is the ideal for all Excursions.
Features
- Increased wheel travel
- Durable powder coat finish
- Less body-roll than stock truck
- Isolates Stock springs for Factory Like Ride Quality
- No change in towing capacity
- No drive shaft modifications needed
- 100% Bolt-on system - no drilling,cutting or welding necessary for install
Notes
- No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
- 2001-2004 3 And 4.5 Hanger Kits Come Complete With A New Replacement Front Cross-Member. This Crossmember Replaces The Factory Crossmember
- These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits
- (1) 99-04 FSD 3" HANGER KIT W/ BASH BAR
- (1) 99-04 FSD 1.375" BUMP STOP SPACER KIT
- (1) 99-UP FSD 4" BLOCK KIT
- (1) 99-10 FSD REAR 15" U-BOLT KIT
- (2) EXCURSION REAR BAR PIN
This 3" system is designed to lift your Ford Excursion 3" in front to provide room for 33 tires. This system drops your stock springs 3", which allows for lift while maintaining the stock spring rate. This system comes with a 1" bump stop spacer (not pictured) to prevent spring fatigue during the suspension cycle. This system is the ideal for all Excursions.
Features
- Increased wheel travel
- Durable powder coat finish
- Less body-roll than stock truck
- Isolates Stock springs for Factory Like Ride Quality
- No change in towing capacity
- No drive shaft modifications needed
- 100% Bolt-on system - no drilling,cutting or welding necessary for install
Notes
- No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
- 2001-2004 3 And 4.5 Hanger Kits Come Complete With A New Replacement Front Cross-Member. This Crossmember Replaces The Factory Crossmember
- These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits
Related Products
Related Products
ICON 4.5" Hanger System (00-05 Ford Excursion)
ICON
$1,727.60
This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35 tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the...
ICON 5" Suspension Kit (00-05 Ford Excursion)
ICON
$3,582.50
This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35 tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the...
ICON 2" Mini Spring Pack (00-05 Ford Excursion)
ICON
$267.95
ICON's 2" system is a great, cost effective way to level out the 2000-2005 Ford excursion and to provide room for 33 x 11.50 tires. This system utilizes a 2" mini front spring pack that is a simple...
Fabtech 3.5" Front Spring Hanger System w/ Performance Shocks | 00-05 Ford Excursion 4WD
Fabtech
$1,182.89
Obtain 3.5in of front end lift without changing the front leaf springs. The super stout spring hangers replace the factory units without welding or cutting. Excursion models will require a 2in rear...
Revtek 6" Suspension Lift System | 00-05 Ford Excursion 4WD
Revtek
$1,494.00
We are a company driven by customer service. Whether you are looking to level your truck for a more aggressive appearance or looking to lift your truck for more clearance and performance, we are your...