null
ICON

ICON 5" Suspension Kit (00-05 Ford Excursion)

(No reviews yet) Write a Review
SKU:
K45000-99-ICN
Shipping:
Calculated at Checkout
$3,582.50

Description

This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35 tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the stock spring rate. This system comes with a 1.75" bump stop spacer to prevent spring fatigue during the suspension cycle. Also included in this kit is 5 rear block kit, with 17 U-bolts for a leveled stance. This system is the ideal for all Excursions.

Features


  • Increased wheel travel
  • Durable powder coat finish
  • Less body-roll than stock truck
  • No change in towing capacity
  • No drive shaft modifications needed
  • 100% Bolt-on system - no drilling, cutting or welding necessary for install

Notes


  • Front U-Bolt Note: All Front Springs Come Complete With Front U-Bolts, Washers, And Nuts. When Ordering Any Front Spring System From Icon Vehicle Dynamics Please Specify Manufacture Year.
  • No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
  • Springs Are Rated For Diesel Engines Only
  • These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits

  • (1) 00-04 FSD FRONT 4-8" BOX KIT
  • (1) 99-04 FSD 1.375" BUMP STOP SPACER KIT
  • (1) 00-04 FSD FRONT 4" LEAF SPRING KIT W/ 37001 UBOLTS
  • (1) 99-07 FSD REAR 5" LEAF SPRING KIT
  • (1) 99-10 FSD REAR 12" U-BOLT KIT
  • (2) EXCURSION REAR BAR PIN

This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35 tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the stock spring rate. This system comes with a 1.75" bump stop spacer to prevent spring fatigue during the suspension cycle. Also included in this kit is 5 rear block kit, with 17 U-bolts for a leveled stance. This system is the ideal for all Excursions.

Features


  • Increased wheel travel
  • Durable powder coat finish
  • Less body-roll than stock truck
  • No change in towing capacity
  • No drive shaft modifications needed
  • 100% Bolt-on system - no drilling, cutting or welding necessary for install

Notes


  • Front U-Bolt Note: All Front Springs Come Complete With Front U-Bolts, Washers, And Nuts. When Ordering Any Front Spring System From Icon Vehicle Dynamics Please Specify Manufacture Year.
  • No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.
  • Springs Are Rated For Diesel Engines Only
  • These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits

View AllClose

Related Products

Related Products