Injen Evolution Cold Air Intake System (Oiled) | 17-23 Ford F-150/18-23 Expedition & Lincoln Navigator | 3.5L V6

Give your F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104C Evolution Cold Air Intake System by Injen Technology. The EVO9104C is specifically engineered for the 3.5L EcoBoost engine. Every EVO9104C cold air intake is made in the USA from cross- linked high density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

The EVO9104C Cold Air Intake system features our 1-piece box and scoop design that incorporates our fully integrated ram air scoop and a massive 360 8-layer oiled cotton gauze air filter. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see.

Roto-molded Housing and Ram Air Scoop:

The EVO9104C system features our 1-piece box design that incorporates our patented Twist Lock air filter attachment technology. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo.

Roto-molded Intake Tube:

The EVO9104C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit.

8-Layer Oiled Cotton Gauze Air Filter:

The Injen 8-Layer oil cotton gauze air filter is included with the EVO9104C cold air intake. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple.

Quality Hardware:

From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.

Hassle-Free Installation:

Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.

Dyno Proven:

Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford F-150/F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the EVO9104C Evolution Air Intake system puts down numbers of up to 19 additional horsepower and 21 Ft.-lbs. of torque.

Features:

Give your F-150/F-150 Raptor, Expedition, or Lincoln Navigator that added punch you crave with the EVO9104C Evolution Cold Air Intake System by Injen Technology. The EVO9104C is specifically engineered for the 3.5L EcoBoost engine. Every EVO9104C cold air intake is made in the USA from cross- linked high density XLPE polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!

The EVO9104C Cold Air Intake system features our 1-piece box and scoop design that incorporates our fully integrated ram air scoop and a massive 360 8-layer oiled cotton gauze air filter. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see.

Roto-molded Housing and Ram Air Scoop:

The EVO9104C system features our 1-piece box design that incorporates our patented Twist Lock air filter attachment technology. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo.

Roto-molded Intake Tube:

The EVO9104C Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit.

8-Layer Oiled Cotton Gauze Air Filter:

The Injen 8-Layer oil cotton gauze air filter is included with the EVO9104C cold air intake. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple.

Quality Hardware:

From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit.

Hassle-Free Installation:

Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood.

Dyno Proven:

Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford F-150/F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the EVO9104C Evolution Air Intake system puts down numbers of up to 19 additional horsepower and 21 Ft.-lbs. of torque.

Features: