null
MaxTrac

MaxTrac 2.5" Front Coil Spacers w/ Shock Extenders (05-23 Ford F-250/F-350 4WD)

(No reviews yet) Write a Review
SKU:
MT-883725
Shipping:
Calculated at Checkout
$164.74

Description

MaxTrac offers a 2.5" leveling lift kit for your Ford F250/F350 Super Duty. MaxTrac has stuck to its guns, even with coil spacers which are typically found in urethane, by fabricating these out of solid 1/4" steel welded by hand here in-house. These spacers mount above the coil spring, making for an easy install. MaxTrac understands that sometimes you just want to run your preferred shocks. Rather than having to replace them when you get a leveling kit, just equip the front end with some lifted shock extenders, and you're good to go. Fabricated from laser cut steel parts, and powder coated in MaxTrac signature gunmetal grey, these are almost as satisfying to install as brand new shocks.
 

Notes

  • Clears up to a 35" x 12.50" tire on 8"-9" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties

Notes

  • Clears up to a 35" x 12.50" tire on 8"-9" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
  • Pair of 2.5" lift coil spacers w/ shock extenders fabricated from steel & powder coated grey
MaxTrac offers a 2.5" leveling lift kit for your Ford F250/F350 Super Duty. MaxTrac has stuck to its guns, even with coil spacers which are typically found in urethane, by fabricating these out of solid 1/4" steel welded by hand here in-house. These spacers mount above the coil spring, making for an easy install. MaxTrac understands that sometimes you just want to run your preferred shocks. Rather than having to replace them when you get a leveling kit, just equip the front end with some lifted shock extenders, and you're good to go. Fabricated from laser cut steel parts, and powder coated in MaxTrac signature gunmetal grey, these are almost as satisfying to install as brand new shocks.
 

Notes

  • Clears up to a 35" x 12.50" tire on 8"-9" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
View AllClose

Additional Information

View AllClose

Related Products

Related Products