null
MaxTrac

MaxTrac 2.5" Front Strut/Coil Spacers (13-18 Ram 1500/19-22 Ram 1500 Classic 4WD)

(No reviews yet) Write a Review
SKU:
MT-832525
Shipping:
Calculated at Checkout
$153.54

Description

MaxTrac Suspension is proud to release a 2.5" front leveling kit for Dodge RAM 1500. The design features a 1" coil spacer as well as a 1.5" strut spacer safely giving you 2.5" of lift. Using this design allows correct A-Arm angle that does not over extend the throw of the balljoint. MaxTrac strut spacer features 1/4" steel plates that are welded bolt hole to bolt hole for strength and our coil spacers are made using 1/2" solid steel. Unlike some companies who use a 2.5" coil spacer (only), MaxTrac split the difference with the coil spacer and strut spacer to keep the strut from topping out which improves the ride. As always the lift kit is built with competitive pricing in mind, and is finished in MaxTrac signature grey, high quality powder coat for durability and rust prevention.

Notes

  • This is a 2 part strut spacer/coil spacer combo. 1.5" lift achieved from strut extensions & 1" lift achieved from coil spacers
  • Fender trimming may be required
  • For Non Air Ride Models
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties

Notes

  • This is a 2 part strut spacer/coil spacer combo. 1.5" lift achieved from strut extensions & 1" lift achieved from coil spacers
  • Fender trimming may be required
  • For Non Air Ride Models
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties

  • Combo of 1.5" lift strut spacers & 1" lift coil spacers both fabricated from steel & powder coated grey
MaxTrac Suspension is proud to release a 2.5" front leveling kit for Dodge RAM 1500. The design features a 1" coil spacer as well as a 1.5" strut spacer safely giving you 2.5" of lift. Using this design allows correct A-Arm angle that does not over extend the throw of the balljoint. MaxTrac strut spacer features 1/4" steel plates that are welded bolt hole to bolt hole for strength and our coil spacers are made using 1/2" solid steel. Unlike some companies who use a 2.5" coil spacer (only), MaxTrac split the difference with the coil spacer and strut spacer to keep the strut from topping out which improves the ride. As always the lift kit is built with competitive pricing in mind, and is finished in MaxTrac signature grey, high quality powder coat for durability and rust prevention.

Notes

  • This is a 2 part strut spacer/coil spacer combo. 1.5" lift achieved from strut extensions & 1" lift achieved from coil spacers
  • Fender trimming may be required
  • For Non Air Ride Models
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties

View AllClose

Related Products

Related Products