null
MaxTrac

MaxTrac 4" Front/2" Rear Lift Kit (01-09 Ford Ranger 2WD | Torsion Bar Models)

(No reviews yet) Write a Review
SKU:
MT-K883042C
Shipping:
Calculated at Checkout
$476.65

Description

MaxTrac Suspension offers a 4/2" lift kit for your Ford Ranger. MaxTrac uses lift spindles to maintain stock like geometry and keep your Ranger riding smooth, while increasing track width by half an inch. This moderate lift height provides enough clearance for much bigger wheels and tires for either a more aggressive street look, or the basis for some off-trail fun. These heavy duty 4" lift spindles are a true bolt on piece which replaces the stock spindles, and exceed OEM specifications. The ductile iron construction makes these bullet proof. The rear of the truck is leveled out with 2" shackles.

Notes

  • Requires 15" rims or larger w/ 3 3/4" backspacing or less
  • 16" rims or larger will work w/ 4 1/2" backspacing or less
  • Fits torsion bar models - Non Stabilitrak
  • Clears up to a 31" x 10.50" tire on 7"-8" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties

Notes

  • Requires 15" rims or larger w/ 3 3/4" backspacing or less
  • 16" rims or larger will work w/ 4 1/2" backspacing or less
  • Fits torsion bar models - Non Stabilitrak
  • Clears up to a 31" x 10.50" tire on 7"-8" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
  • 4" lift spindles & 2" lift shackles
MaxTrac Suspension offers a 4/2" lift kit for your Ford Ranger. MaxTrac uses lift spindles to maintain stock like geometry and keep your Ranger riding smooth, while increasing track width by half an inch. This moderate lift height provides enough clearance for much bigger wheels and tires for either a more aggressive street look, or the basis for some off-trail fun. These heavy duty 4" lift spindles are a true bolt on piece which replaces the stock spindles, and exceed OEM specifications. The ductile iron construction makes these bullet proof. The rear of the truck is leveled out with 2" shackles.

Notes

  • Requires 15" rims or larger w/ 3 3/4" backspacing or less
  • 16" rims or larger will work w/ 4 1/2" backspacing or less
  • Fits torsion bar models - Non Stabilitrak
  • Clears up to a 31" x 10.50" tire on 7"-8" wide rim
  • Fender trimming may be required
  • MaxTrac suspension does not recommend using wheels wider than 9" or wheels with less than 4.5" backspacing. Doing so will result in voiding any and all manufacturer warranties
View AllClose

Related Products

Related Products