null
Mishimoto

Mishimoto Hot-Side Intercooler Pipe And Boot Kit | Polished (17-19 Chevy/GMC Silverado/Sierra 2500HD/3500HD | 6.6L)

(No reviews yet) Write a Review
SKU:
MMICP-DMAX-17HP-MM
Shipping:
Calculated at Checkout
$343.95

Description

Improve the power and efficiency of your Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the L5P is a measly 2.5in that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3in in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. Like all our Duramax products, this hot-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.
Features:
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Eliminates stock resonator for improved flow
  • Up to 55% less restrictive than stock piping
  • Bung can be drilled and tapped for additional sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Mishimoto Lifetime Warranty
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Up to 55% less restrictive than stock piping
  • Includes new quick-disconnect O-ring and spring clip
  • Hot-side eliminates stock resonator for maximum flow
  • Eliminates failure-prone stock throttle valve connector
  • Retains temp sensor harness mount for safe and secure wire routing
  • Internal bead roll ensures secure connection between coupler and throttle valve
  • CNC-machined quick-disconnect ensures precise, leak-free fit
  • Additional bungs can be drilled and tapped for sensors
  • Requires no additional tuning
  • Eliminates stock resonator for improved flow
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Up to 55% less restrictive than stock piping
  • Bung can be drilled and tapped for additional sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Mishimoto Lifetime Warranty
Improve the power and efficiency of your Chevrolet/GMC 6.6L Duramax L5P with the Mishimoto hot-side intercooler pipe and boot kit. The factory hot-side pipe for the L5P is a measly 2.5in that chokes the engine, while the tight bends and built-in resonator create even more restriction. The Mishimoto hot-side intercooler pipe is 3in in diameter throughout and eliminates the factory resonator to significantly increase airflow, resulting in more power potential. Mishimoto designed this pipe as two pieces, like the factory pipe, for ease of install. This kit also includes our silicone boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. The Mishimoto Chevrolet/GMC 6.6L Duramax L5P hot-side intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle-black powder coated finish. Like all our Duramax products, this hot-side intercooler pipe and boot kit includes our Mishimoto Lifetime Warranty for a lifetime of performance.
Features:
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Eliminates stock resonator for improved flow
  • Up to 55% less restrictive than stock piping
  • Bung can be drilled and tapped for additional sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Mishimoto Lifetime Warranty
  • Direct fit for Chevrolet/GMC 6.6L Duramax L5P
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • 3.0" mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Up to 55% less restrictive than stock piping
  • Includes new quick-disconnect O-ring and spring clip
  • Hot-side eliminates stock resonator for maximum flow
  • Eliminates failure-prone stock throttle valve connector
  • Retains temp sensor harness mount for safe and secure wire routing
  • Internal bead roll ensures secure connection between coupler and throttle valve
  • CNC-machined quick-disconnect ensures precise, leak-free fit
  • Additional bungs can be drilled and tapped for sensors
  • Requires no additional tuning
  • Eliminates stock resonator for improved flow
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Up to 55% less restrictive than stock piping
  • Bung can be drilled and tapped for additional sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Mishimoto Lifetime Warranty
View AllClose

Additional Information

View AllClose

Related Products

Related Products