null
ReadyAir

ReadyAir AirIQ Air Management Package | Pre-assembled | 1-channel | 275sd Compressor

(No reviews yet) Write a Review
SKU:
50-41100-RDYA
Shipping:
Calculated at Checkout
$699.95

Description

Our most affordable AirIQ solution with a Standard Duty compressor and single channel valving for control of both air springs together.

Logiq AirIQ Complete Air Management
AirIQ Complete Air Management packages for load leveling are factory assembled and tested for guaranteed performance. Our ready-to-bolt-on packages fix weight-related rear squat, with options for side-to-side leveling and on-board air. Nothing rivals the ease and performance of AirIQ.

Easy-to-Use App
The AirIQ Bluetooth App delivers user-friendly control of your air suspension and is available free for iOS and Android devices. The App yields precise adjustment of air pressures resulting in effortless height management with the ability to save up to 8 custom presets for different loads.

AirIQ Modular Design
The modular design of AirIQ can contain anywhere from 1-4 corner modules and can be customer upgraded at anytime. Never throw away to upgrade again...

Smart Corner Modules
Each corner module contains OEM quality solenoid valves, an onboard precision pressure sensor, and a microprocessor running intelligent algorithms for accurate leveling.

Features

  • 1-Channel AirIQ Bluetooth Management System
  • 25% Duty Cycle 150 psi Compressor with 2.03 CFM @ 0 psi
  • Single Axis Control Front to Rear
  • Pre-assembled with Plumbing Kit and Wiring + Easy Mount

Notes

  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
  • INSTALLATION ALIGNMENT: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
  • INSTALLATION HEADLAMP AIM: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
  • INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS): If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle's systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
  • DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended.
  • Estimated Installation Time: 2.5 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)
  • AirIQ (SD1/SD2/HD2)
  • Air Management
  • System with 20 ft
  • wiring harness
  • pre-installed
  • (4) 5/16"-18 x 5" Hex Bolt
  • (4) 5/16"-18 x 3/4" Hex Bolt
  • (8) 5/16"-18 Nylock Flanged Nut
  • (8) 5/16" Flat Washer
  • (1) 30A Fuse & Holder (12AWG)
  • (1) 10A Fuse & Holder (16AWG)
  • (1) Butt Splice (22-16 AWG)
  • (1) Butt Splice (12-10 AWG)
  • (4) Frame Brackets
  • (1) (2) 3/8" Ring Terminal 16 AWG
  • (2) 3/8" Ring Terminal 12 AWG
  • (1) Small Fuse Tap & Terminal
  • (1) Large Fuse Tap & Terminal
  • (18 ft) 3/8" Wire Loom
  • (20 ft) 1/4" Air Line
  • (40) 8" Zip Ties
  • (1) Airline Cutter
View AllClose

Additional Information

Universal Product:
Yes
View AllClose