Rough Country
Rough Country 5" Lift Kit | Dual Rate Coil Springs | Non-AISIN Transmission | N3 Shocks (19-23 Ram 2500 | 4WD | Diesel)
- SKU:
- 38330-RC
- Shipping:
- Calculated at Checkout
Description
Compliment your RAM 2500's aggressive, good looks with Rough Country's new 5-inch Lift Kit with lifted coil springs. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!
When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, Clevite Rubber Bushing for maximum vibration absorption. This kit also includes a skid plate and a set of front and rear dual-rate lifted coil springs for unparalleled ride quality from your lifted Dodge Ram. The Dual Rate coil srpings combine a relatively low initial spring rate, designed to absorb minor undulations and increase grip with a precise transition point and transition range to a secondary higher spring rate to improve handling and driveability.
Features
- Increased ground clearance
- Includes front and rear dual-rate coil springs
- Track bar bracket keeps the front axle properly centered
- Radius Arms offer a more factory-like angle and feature a durable, Clevite
- Rubber Bushing for maximum vibration absorption
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Install Time
7-9 hours
Notes
- Requires removal of Transfer case for clocking ring install for correct front
- driveline geometry.
- Does NOT fit 'Power Wagon' models
- Does NOT fit air ride models.
- ONLY fits Diesel models
- Requires minor cutting.
- On vehicles equipped with a two piece driveshaft & carrier bearing as on the
- Mega Cab, there is the potential for take off vibration
Front Components:
- Lifted dual-rate Coil springs
- Radius arms
- Track bar bracket
- Bump stops
- Sway-bar brackets
- Transmission Crossmember
- Pitman arm
- Hardware
Rear Components:
- Lifted dual-rate Coil springs
- Rear lift spacers
- Track bar bracket
- Transfer Case Skid Plate
- Sway-bar links
- Bump stop brackets
- Ride height arms
- Hardware
Compliment your RAM 2500's aggressive, good looks with Rough Country's new 5-inch Lift Kit with lifted coil springs. New model RAM Trucks come with a wealth of impressive features right from the factory. Rough Country's new 5-inch kit was engineered to retain these impressive factory specs while bumping up performance and durability where it's needed most. The result is a lifted beast with a mean profile and lush ride-quality that'll make other RAM owners wonder where you got yours from!
When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 5-inch Suspension kit features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. These beefy, upgraded Radius Arms also feature a durable, Clevite Rubber Bushing for maximum vibration absorption. This kit also includes a skid plate and a set of front and rear dual-rate lifted coil springs for unparalleled ride quality from your lifted Dodge Ram. The Dual Rate coil srpings combine a relatively low initial spring rate, designed to absorb minor undulations and increase grip with a precise transition point and transition range to a secondary higher spring rate to improve handling and driveability.
Features
- Increased ground clearance
- Includes front and rear dual-rate coil springs
- Track bar bracket keeps the front axle properly centered
- Radius Arms offer a more factory-like angle and feature a durable, Clevite
- Rubber Bushing for maximum vibration absorption
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Install Time
7-9 hours
Notes
- Requires removal of Transfer case for clocking ring install for correct front
- driveline geometry.
- Does NOT fit 'Power Wagon' models
- Does NOT fit air ride models.
- ONLY fits Diesel models
- Requires minor cutting.
- On vehicles equipped with a two piece driveshaft & carrier bearing as on the
- Mega Cab, there is the potential for take off vibration