null
Rough Country

Rough Country 6 Inch Lift Kit | M1 Struts/M1 (16-21 Toyota Tundra)

(No reviews yet) Write a Review
SKU:
75240-RC
Shipping:
Calculated at Checkout
$1,659.95

Description

You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.

Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country's Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country's Lifetime Replacement Guarantee.

You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit.

Features

  • Unmatched ground clearance due to high clearance crossmember design.
  • 100% precision laser cut materials used in latest computer aided design process.
  • Levels the front with the rear of the vehicle
  • Will work with factory 18-inch or larger wheels.
  • Requires no modification to the stock differential mounts, drivetrain or exhaust.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Notes

  • Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
  • Cutting and drilling is required.
  • Does NOT fit Pro Series models.
  • On TRD models equipped with a red rear sway bar it must be removed for installation.
  • Does NOT fit XSP-X models.
  • Requires 18-inch or larger wheels.
  • Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
  • In some cases minor trimming may be needed to clear 35-inch tires.
  • On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
Front:
  • Lifted knuckles
  • Strut spacers
  • Front crossmember
  • Rear crossmember
  • Steering stops
  • Brake line brackets
  • Differential drop brackets
  • Bumpstop brackets
  • Sway-bar brackets
  • Lower skid plate
  • Hardware
Rear:
  • Fabricated lift blocks
  • U-bolts
  • Brake line brackets
  • Hardware
Shocks:
  • (2) Premium N3 Series (Rear)
You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance. The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups.

Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention. This kit includes Rough Country's Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country's Lifetime Replacement Guarantee.

You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit.

Features

  • Unmatched ground clearance due to high clearance crossmember design.
  • 100% precision laser cut materials used in latest computer aided design process.
  • Levels the front with the rear of the vehicle
  • Will work with factory 18-inch or larger wheels.
  • Requires no modification to the stock differential mounts, drivetrain or exhaust.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Notes

  • Lifted strut replacements (N3/M1/Vertex) do NOT fit 2WD models.
  • Cutting and drilling is required.
  • Does NOT fit Pro Series models.
  • On TRD models equipped with a red rear sway bar it must be removed for installation.
  • Does NOT fit XSP-X models.
  • Requires 18-inch or larger wheels.
  • Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch.
  • In some cases minor trimming may be needed to clear 35-inch tires.
  • On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with SKU: 1776BOX1 carrier bearing shim kit.
View AllClose

Additional Information

View AllClose

Related Products

Related Products