null
Rough Country

Rough Country 7" Lift Kit | For OEM Aluminum or Stamped Steel Control Arms | Vertex Coilovers | Vertex Shocks (14-18 Chevy Silverado/GMC Sierra 1500 | 4WD)

(No reviews yet) Write a Review
SKU:
17450-RC
Shipping:
Calculated at Checkout
$3,099.95

Description

Features


  • Can run factory 20-inch wheels.
  • Provides highly sought level stance.
  • High clearance crossmember design gives unmatched ground clearance.
  • 100% precision laser cut materials using the latest computer aided design process.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Notes


  • IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
  • Does not fit Hybrid eAssist models
  • Does NOT fit models with stock Cast Steel Control Arms
  • Does NOT fit GMC Denali models with Magnetic Ride Control.
  • Requires cutting and drilling.
  • If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
  • 18-inch or larger wheels are required.
  • Please view installation instructions for complete information on proper tire/wheel combinations.
  • If truck is equipped with a mass damper on the front differential, the damper must be removed.

FRONT:
  • Lifted knuckles
  • Front crossmember
  • Rear crossmember
  • Lifted Vertex Reservoir Coil-Overs
  • CV spacers
  • Differential drop brackets
  • Differential skid plate
  • Sway-bar drop brackets
  • Hardware

REAR:
  • Fabricated lift blocks
  • Brake line brackets
  • U-bolts
  • Hardware

Features


  • Can run factory 20-inch wheels.
  • Provides highly sought level stance.
  • High clearance crossmember design gives unmatched ground clearance.
  • 100% precision laser cut materials using the latest computer aided design process.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Notes


  • IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
  • Does not fit Hybrid eAssist models
  • Does NOT fit models with stock Cast Steel Control Arms
  • Does NOT fit GMC Denali models with Magnetic Ride Control.
  • Requires cutting and drilling.
  • If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
  • 18-inch or larger wheels are required.
  • Please view installation instructions for complete information on proper tire/wheel combinations.
  • If truck is equipped with a mass damper on the front differential, the damper must be removed.

View AllClose