Rough Country
Rough Country 7" Lift Kit | Stock Cast Steel Control Arms | Lifted Struts | N3 Shocks (14-16 Chevy Silverado/GMC Sierra 1500 | 4WD)
(No reviews yet)
Write a Review
- SKU:
- 22833-RC
- Shipping:
- Calculated at Checkout
Description
Features
- Can run factory 20-inch wheels.
- Provides highly sought level stance.
- Includes pre-loaded coil for no-fuss assembly
- High clearance crossmember design gives unmatched ground clearance.
- 100% precision laser cut materials using the latest computer aided design process.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Notes
- IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
- Does not fit Hybrid eAssist models
- Does NOT fit models with stock Cast Aluminum or Stamped Steel Control Arms
- Does NOT fit GMC Denali models with Magnetic Ride Control.
- Requires cutting and drilling.
- If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
- 18-inch or larger wheels are required.
- Please view installation instructions for complete information on proper tire/wheel combinations.
- If truck is equipped with a mass damper on the front differential, the damper must be removed.
- Lifted knuckles
- N3 Loaded Struts
- Front crossmember
- Rear crossmember
- CV spacers
- Differential drop brackets
- Differential skid plate
- Sway-bar drop brackets
- Hardware
REAR:
- Fabricated lift blocks
- Brake line brackets
- U-bolts
- Hardware
Features
- Can run factory 20-inch wheels.
- Provides highly sought level stance.
- Includes pre-loaded coil for no-fuss assembly
- High clearance crossmember design gives unmatched ground clearance.
- 100% precision laser cut materials using the latest computer aided design process.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Notes
- IMPORTANT! - Installation of larger tires will require a Hypertech Speedometer Calibrator (#732501)
- Does not fit Hybrid eAssist models
- Does NOT fit models with stock Cast Aluminum or Stamped Steel Control Arms
- Does NOT fit GMC Denali models with Magnetic Ride Control.
- Requires cutting and drilling.
- If wider than 35x12.50 R20 tires are used, offset wheels will be required and trimming may be required.
- 18-inch or larger wheels are required.
- Please view installation instructions for complete information on proper tire/wheel combinations.
- If truck is equipped with a mass damper on the front differential, the damper must be removed.
