SUPERLIFT 4" Lift Kit - 00-04 F-250/F-350 4WD - Diesel/V10 - w/ Bilstein Shocks

Notes

• Rear u-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2" of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application.
  


• Rear lift based on vehicles with 2.5" tall factory. If vehicle equipped with 3.5" tall factory block expect slight rear to front rake.
  


• 5.4L V-8 equipped trucks will sit slightly taller than advertised lift.
  


• This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line for additional details.
  

Features

• Springs incorporate military-wrapped spring eyes and anti friction pads between leafs.
• Track bar relocation bracket prevents steering wheel "kick".
• New front anti-sway bar hardware maintain factory bar geometry.
• Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated.
• Rear lift via 3" blocks.
• Front and rear Superlift shocks or Superlift SS series shocks by Bilstein included.
  
  

Install Time

Notes

• Rear u-bolts fit vehicles with and without a top-mounted overload leaf. Those without overloads will have approx. 2" of excess U-bolt length (that can be trimmed). Or for shorter U-bolts, refer to block chart and replace listed block kit with the non-overload application.
  


• Rear lift based on vehicles with 2.5" tall factory. If vehicle equipped with 3.5" tall factory block expect slight rear to front rake.
  


• 5.4L V-8 equipped trucks will sit slightly taller than advertised lift.
  


• This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line for additional details.