SUPERLIFT 4" Lift Kit - 05-07 F-250/F-350 4WD - Diesel - w/ Bilstein Shocks

Notes

• Factory rear overload springs cannot be retained if replacement rear springs are used.
  
• Dually applications may require different u-bolts.
  
• If vehicle is equipped with top mount overload springs a different rear u-bolt kit is required that is 2" longer than supplied in lift system; for 2.5" rear block order part number 11674 or 5" Rear block kit order part number #11694.
  
• If equipped with a two-piece driveshaft, also order carrier bearing drop bracket part number #9649.
  
• If the vehicle is equipped with rear top mount overload springs a longer rear u-bolt kit, part number #11674, is required.
  
• This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.
  

• Includes frame-mounted radius arm lowering brackets.
• Front compression travel-stop relocation brackets prevent suspension over-compression.
• Track bar relocation bracket prevents bind, and the resulting roll and yaw, and steering wheel kick.
• Threaded front anti-sway bar extensions do not require cutting/welding.
• Proper factory steering stabilizer angle is restored for optimum operation.
• Includes either Superlift (gas front, hydraulic rear), or Superlift Select Series (SS) monotube gas shock by Bilstein.
• Rear lift via blocks.
  
  

Install Time

Notes

• Factory rear overload springs cannot be retained if replacement rear springs are used.
  
• Dually applications may require different u-bolts.
  
• If vehicle is equipped with top mount overload springs a different rear u-bolt kit is required that is 2" longer than supplied in lift system; for 2.5" rear block order part number 11674 or 5" Rear block kit order part number #11694.
  
• If equipped with a two-piece driveshaft, also order carrier bearing drop bracket part number #9649.
  
• If the vehicle is equipped with rear top mount overload springs a longer rear u-bolt kit, part number #11674, is required.
  
• This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.