null
Superlift

SUPERLIFT 4" Lift Kit - 05-07 F-250/F-350 4WD - Diesel - w/ SL Shocks

(No reviews yet) Write a Review
SKU:
K796-SUP
Shipping:
Calculated at Checkout
$1,179.99

Description

Superlift's complete coil spring lift kit for the 2005-2007 Ford F-250/F-350 Diesel Engine, providing 4" lift height.

  • Includes frame-mounted radius arm lowering brackets.
  • Front compression travel-stop relocation brackets prevent suspension over-compression.
  • Track bar relocation bracket prevents bind, and the resulting roll and yaw, and steering wheel kick.
  • Threaded front anti-sway bar extensions do not require cutting/welding.
  • Proper factory steering stabilizer angle is restored for optimum operation.
  • Includes either Superlift (gas front, hydraulic rear), or Superlift Select Series (SS) monotube gas shock by Bilstein.
  • Rear lift via blocks.
The 4" lift for the coil sprung Super Duty is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and a steering stabilizer bracket. Rear lift via 2.5" blocks.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • Factory rear overload springs cannot be retained if replacement rear springs are used.
  • Dually applications may require different u-bolt.
  • If vehicle is equipped with top mount overload springs a different rear u-bolt kit is required that is 2" longer than supplied in lift system; for 2.5" rear block order part number 11674 or 5" Rear block kit order part number #11694.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket part number #9649.
  • If the vehicle is equipped with rear top mount overload springs a longer rear u-bolt kit, part number #11674, is required.
  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.

Notes


  • Factory rear overload springs cannot be retained if replacement rear springs are used.
  • Dually applications may require different u-bolt.
  • If vehicle is equipped with top mount overload springs a different rear u-bolt kit is required that is 2" longer than supplied in lift system; for 2.5" rear block order part number 11674 or 5" Rear block kit order part number #11694.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket part number #9649.
  • If the vehicle is equipped with rear top mount overload springs a longer rear u-bolt kit, part number #11674, is required.
  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.

  • Front coil springs
  • Track bar bracket
  • Radius arm brackets
  • Sway bar correction
  • Shocks
  • Rear block
  • U-bolt kit
  • Hardware
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

Superlift's complete coil spring lift kit for the 2005-2007 Ford F-250/F-350 Diesel Engine, providing 4" lift height.

  • Includes frame-mounted radius arm lowering brackets.
  • Front compression travel-stop relocation brackets prevent suspension over-compression.
  • Track bar relocation bracket prevents bind, and the resulting roll and yaw, and steering wheel kick.
  • Threaded front anti-sway bar extensions do not require cutting/welding.
  • Proper factory steering stabilizer angle is restored for optimum operation.
  • Includes either Superlift (gas front, hydraulic rear), or Superlift Select Series (SS) monotube gas shock by Bilstein.
  • Rear lift via blocks.
The 4" lift for the coil sprung Super Duty is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and a steering stabilizer bracket. Rear lift via 2.5" blocks.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • Factory rear overload springs cannot be retained if replacement rear springs are used.
  • Dually applications may require different u-bolt.
  • If vehicle is equipped with top mount overload springs a different rear u-bolt kit is required that is 2" longer than supplied in lift system; for 2.5" rear block order part number 11674 or 5" Rear block kit order part number #11694.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket part number #9649.
  • If the vehicle is equipped with rear top mount overload springs a longer rear u-bolt kit, part number #11674, is required.
  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us. Please refer to the option's list or call our technical support line at (800) 551-4955 for additional details.

View AllClose

Additional Information

View AllClose

Related Products

Related Products