SUPERLIFT 4" Lift Kit - 10-13 Ram 2500/10-12 3500 4WD - Diesel - w/ Bilstein Shocks

This is the Superlift 4" lift kit with Superlift shocks or Bilstein shocks for the 2010-2013 Ram 2500 4WD and 2010-2012 Ram 3500 4WD HEMI pickups.

The coil sprung, solid axle Ram2500 and 3500 HD will always be a favorite of the Superlift Nation, and for good reason. The suspension platform is "lift friendly", the drivetrain is durable, and the HEMI provides more than adequate torque for large rubber.

Over the years, Superlift has established a reputation as the "go to" source for Ram 2500 and 3500's suspension. How did we earn this? Our ideal engine-specific coil spring rates and shock valving have something to do with it. As does the superb steering mannerisms that are a result of ideal caster settings, and correct track bar/pitman arm phasing. Properly addressing things that generally go unaddressed by others yet matter, like suspension compression travel control. It all adds up. Let us show you just how satisfying your lifted Ram experience can be.

The 4" lift begins with new engine-specific pre-set coil springs. A dropped pitman arm for steering correction works in concert with our track bar relocation bracket. New upper and lower front axle-to-frame link arms restore factory alignment specifications. Specially designed, suspension compression travel bump-stops are also provided. Lift blocks raise the rear 4" to negate the factory nose-down stance.

This lift kit is packaged with Superlift shocks or 5100 series Bilstein shocks engineered for optimal valving and control.

Install Time

8 hours
Difficulty level: 3 of 5

• Front coil springs
• Track bar bracket
• upper and lower control arms
• Shocks
• Drop pitman arm
• Sway bar correction
• Rear block
• U-bolt kit
• Hardware
• Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.