null
Superlift

SUPERLIFT 4" Lift Kit w/ Fox 2.0 Reservoir Shocks | 11-16 Ford F-250 Super Duty/F-350 Super Duty 4WD Diesel

(No reviews yet) Write a Review
SKU:
K876FX-SUP
Shipping:
Calculated at Checkout
$2,299.99

Description

This 4" Lift for the Ford Super Duty F-250 | F-350 4WD features Superlift's engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle and alignment. Other components included with this 4-inch suspension system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and steering stabilizer bracket. Rear lift is achieved by 2.5 inch blocks.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets.

Features

  • Replacement Front coil springs improve ride quality while rear blocks maintain load capacity
  • Radius Arm lowering brackets
  • Front Compression Travel-Stop Brackets prevent suspension over-compression
  • Track bar relocation bracket prevents stud bind, resulting roll and yaw, and steering wheel kick
  • Threaded front anti-sway extensions do not require cutting or welding
  • Front and Rear Shocks: Fox 2.0 Reservoir Shocks
  • Backed by our limited lifetime warranty
  • Aligns to OEM specifications
  • Maintains ride quality and handling characteristics

Install Time

Installation time: 8 hours
Difficulty level: 3 of 5

Notes

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required
  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 | F-350 with the factory 1 7/8 inch blocks WITHOUT top mount overloads. If your Ford is equipped with top is equipped with the factory 3.71 inch blocks or top mount overloads, a long rear u-bolt will be required. For Super duty's equipped with 1-7/8 inch blocks and top mount overloads, U-Bolt 4 Pack will need to be purchased in addition to the lift kit. If the truck is equipped with 371 inch block and top mount overloads, U-Bolt 4 Pack Large Radius kit is required
  • Front coil springs, track bar bracket, radius arm brackets, sway bar correction, shocks, rear block and U-bolt kit, and all hardware required specific to the 2011-2016 4WD Ford F-250/F-350 Diesel
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
This 4" Lift for the Ford Super Duty F-250 | F-350 4WD features Superlift's engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle and alignment. Other components included with this 4-inch suspension system are front compression travel-stop relocation brackets, track bar relocation bracket, front anti-sway bar extensions, and steering stabilizer bracket. Rear lift is achieved by 2.5 inch blocks.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets.

Features

  • Replacement Front coil springs improve ride quality while rear blocks maintain load capacity
  • Radius Arm lowering brackets
  • Front Compression Travel-Stop Brackets prevent suspension over-compression
  • Track bar relocation bracket prevents stud bind, resulting roll and yaw, and steering wheel kick
  • Threaded front anti-sway extensions do not require cutting or welding
  • Front and Rear Shocks: Fox 2.0 Reservoir Shocks
  • Backed by our limited lifetime warranty
  • Aligns to OEM specifications
  • Maintains ride quality and handling characteristics

Install Time

Installation time: 8 hours
Difficulty level: 3 of 5

Notes

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required
  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 | F-350 with the factory 1 7/8 inch blocks WITHOUT top mount overloads. If your Ford is equipped with top is equipped with the factory 3.71 inch blocks or top mount overloads, a long rear u-bolt will be required. For Super duty's equipped with 1-7/8 inch blocks and top mount overloads, U-Bolt 4 Pack will need to be purchased in addition to the lift kit. If the truck is equipped with 371 inch block and top mount overloads, U-Bolt 4 Pack Large Radius kit is required
View AllClose

Additional Information

View AllClose

Related Products

Related Products