SUPERLIFT 4" Lift Kit w/ Fox Shocks | 97-02 Jeep Wrangler TJ 2 Door 4WD

Notes

• A very small percentage of Jeeps with 4" of lift (except Rubicon model) will require a Slip Yoke Eliminator (SLE) and replacement driveshaft kit to reduce driveshaft angle/driveline vibration; this cannot be determined until the lift is installed, and the Jeep road tested

• Front and rear coil springs, lower control arms, sway bar correction, transfer case drop, shocks, and all hardware required
• Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Features

• Everything You Will Need To Lift Your Vehicle
• Maintains Stock Like Ride Characteristics
• New Cam Bolts Allow Pinion Angle Adjustment
• T-Case Drop To Decrease Driveshaft Bind
• Full Length Replacement Sway Bar Links
• Limited Lifetime Warranty
• Maintains Proper Steering Geometry

Install Time