null
Superlift

SUPERLIFT 4" Lift Kit w/ SL Shocks (00-11 Ford Ranger | 4WD)

(No reviews yet) Write a Review
SKU:
K358-SUP
Shipping:
Calculated at Checkout
$1,719.99

Description

This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4" of lift height.

Features


  • New nodular iron knuckles, not ball joint spacers
  • Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
  • Full-width differential/control arm crossmembers provide lateral rigidity
  • Rear lift achieved via blocks
  • Front / rear Superide shocks included
  • Heavy-duty replacement front driveshaft available
  • The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.
  • This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.
  • A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.

Install Time

9 hours
Difficulty level: 3 of 5

Notes


  • When lifted, the stock front driveshaft's life span is considerably reduced; expect a life of 25k to 30k miles. The Superlift replacement shaft is a more "lift friendly" dual cardan design.

  • Some models may require the purchase of aftermarket alignment cams, as some vehicles were not equipped from the factory with cam bolts.

  • FX4 models require optional Rear U-bolt Kit part #10914.

  • All brackets
  • Shocks
  • Steering knuckles
  • Crossmembers
  • Rear block
  • U-bolt kit
  • Hardware
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

This is Superlift's complete knuckle style suspension lift kit for the 1998-1999, or 2000-2010 Ford Ranger 4wd; providing 4" of lift height.

Features


  • New nodular iron knuckles, not ball joint spacers
  • Load bearing bracketry made of .25" thick plate steel or heavy-wall tubing
  • Full-width differential/control arm crossmembers provide lateral rigidity
  • Rear lift achieved via blocks
  • Front / rear Superide shocks included
  • Heavy-duty replacement front driveshaft available
  • The lift kit retains factory ride quality, steering geometry, and CV axle angles. All load-bearing bracketry is laser-cut from .25" steel plate.
  • This replacement steering knuckle lift includes lower control arm crossmembers, plus bracketry to lower the torsion bar crossmember.
  • A 3" block kit provides rear lift. The lift kit includes front and rear Superlift shocks.

Install Time

9 hours
Difficulty level: 3 of 5

Notes


  • When lifted, the stock front driveshaft's life span is considerably reduced; expect a life of 25k to 30k miles. The Superlift replacement shaft is a more "lift friendly" dual cardan design.

  • Some models may require the purchase of aftermarket alignment cams, as some vehicles were not equipped from the factory with cam bolts.

  • FX4 models require optional Rear U-bolt Kit part #10914.

View AllClose

Additional Information

View AllClose

Related Products

Related Products