null
Superlift

SUPERLIFT 4" Lift Kit | With Bilstein Shocks (17-22 Ford F-250/350 Super Duty | 4WD | Diesel)

(No reviews yet) Write a Review
SKU:
K164B-SUP
Shipping:
Calculated at Checkout
$1,429.99

Description

The 4" lift for the 2017-2019 Ford Super Duty 4WD is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are: front compression travel-stop relocation brackets, track bar relocation bracket, and a steering stabilizer bracket. The rear lift is achieved with a new design fabricated rear block that allows the removal of the stock block. The kit is packaged complete with Superlift or Superlift SS shocks by Bilstein.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

  • Front coil springs
  • Radius arm drops
  • Track bar bracket
  • Brake line brackets
  • Steering stabilizer bracket
  • Superlift or Bilstein shocks
  • Hardware
  • Rear fabricated blocks with ubolts and Superlift shocks.
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

The 4" lift for the 2017-2019 Ford Super Duty 4WD is achieved via engine specific coil springs to ensure proper lift height and maintain factory ride quality. Radius arm lowering brackets are used to restore proper caster angle/alignment. Other components included with the 4" system are: front compression travel-stop relocation brackets, track bar relocation bracket, and a steering stabilizer bracket. The rear lift is achieved with a new design fabricated rear block that allows the removal of the stock block. The kit is packaged complete with Superlift or Superlift SS shocks by Bilstein.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

View AllClose

Additional Information

View AllClose

Related Products

Related Products