null
Superlift

SUPERLIFT 4" Radius Arm Lift Kit w/Bilstein Shocks | 17-22 F-250/F-350 Super Duty 4WD | Diesel

(No reviews yet) Write a Review
SKU:
K165B-SUP
Shipping:
Calculated at Checkout
$2,099.99

Description

Superlift's 4" Lift Kit with replacement radius arms for 2017-2019 Ford Super Duty features set of massive, high clearance, precision engineered, tubular radius arms designed to bolt right into the factory mounts giving your ride a truly custom look and an easy install. These heavy-duty radius arms utilize a press fit Cleveite rubber bushing for superior vibration damping and durability.

The 4" lift also contains new, diesel engine specific rated coil springs. A new track bar relocation bracket is also provided to ensure proper steering geometry and track bar phasing. The rear lift is achieved with a new design fabricated rear block that allows the removal of the stock block. The kit is packaged complete with Superlift or Superlift SS shocks by Bilstein.

Install Time

6 hours
Difficulty level: 3 of 5

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

  • Front coil springs
  • Replacement radius arms
  • Track bar bracket
  • Brake line brackets
  • Steering stabilizer bracket
  • Superlift or Bilstein shocks
  • Hardware
  • Rear fabricated blocks with ubolts and Superlift shocks.
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

Superlift's 4" Lift Kit with replacement radius arms for 2017-2019 Ford Super Duty features set of massive, high clearance, precision engineered, tubular radius arms designed to bolt right into the factory mounts giving your ride a truly custom look and an easy install. These heavy-duty radius arms utilize a press fit Cleveite rubber bushing for superior vibration damping and durability.

The 4" lift also contains new, diesel engine specific rated coil springs. A new track bar relocation bracket is also provided to ensure proper steering geometry and track bar phasing. The rear lift is achieved with a new design fabricated rear block that allows the removal of the stock block. The kit is packaged complete with Superlift or Superlift SS shocks by Bilstein.

Install Time

6 hours
Difficulty level: 3 of 5

Notes


  • If equipped with a 2 piece rear drive shaft, a carrier bearing spacer is required. Part # 9649.
  • If equipped with factory top mount overload leaf, longer ubolts will be required. Part # 11724.

View AllClose