null
Superlift

SUPERLIFT 4" Replacement Radius Arms Lift Kit w/ Fox 2.0 Reservoir Shocks | 08-10 Ford F-250 Super Duty/F-350 Super Duty 4WD Diesel

(No reviews yet) Write a Review
SKU:
K981FX-SUP
Shipping:
Calculated at Checkout
$2,699.99

Description

This is the Superlift 4" suspension lift kit is for the Ford F-250 | F-350 Super Duty 4WD - Diesel Engine

OEM CAD models and the latest 3D software were used to precision engineer a suspension system that includes a set of massive, high-clearance tubular radius arms designed to bolt right into the factory mounts. These heavy-duty radius arms use the giant press fit OEM Cleveite bushing to reduce noise, vibration, and harshness (NVH). They feature a "True Flat" jack plate surface, include alignment cam bolts and are offset to the inside allowing maximum turning radius and tire clearance.

Track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets, rear lift and all the necessary hardware is included to make certain this package is complete with everything you need to the job right.

Features

  • Replacement Front coil springs improve ride quality while rear blocks maintain load capacity
  • High Clearance Replacement Radius Arms with Cleveite OE Style rubber bushings
  • Track bar relocation bracket prevents stud bind and steering wheel kick
  • Front and Rear Shocks: Fox 2.0 Reservoir Shocks
  • Backed by our limited lifetime warranty
  • Retains OEM caster and camber alignment specifications
  • Maintains ride quality and handling characteristics
  • Designed using Original Equipment (OE) CAD data for accuracy

Install Time

Installation time: 6-7 hours
Difficulty level: 3 of 5

Notes

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required
  • If equipped with factory top mount overload leaf springs, longer U-bolts are required. U-Bolt 4 Pack will need to be purchased in addition to the lift kit. If truck equipped with 3.71 inch block and top mount overloads, U-Bolt 4 pack is required
  • Front coil springs, track bar bracket, replacement radius arms, sway bar correction, shocks, rear block and U-bolt kit, and all hardware required specific to the 2008-2010 4WD Ford F-250/F-350 Diesel Engine
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
This is the Superlift 4" suspension lift kit is for the Ford F-250 | F-350 Super Duty 4WD - Diesel Engine

OEM CAD models and the latest 3D software were used to precision engineer a suspension system that includes a set of massive, high-clearance tubular radius arms designed to bolt right into the factory mounts. These heavy-duty radius arms use the giant press fit OEM Cleveite bushing to reduce noise, vibration, and harshness (NVH). They feature a "True Flat" jack plate surface, include alignment cam bolts and are offset to the inside allowing maximum turning radius and tire clearance.

Track bar relocation bracket, front sway bar correction, bump stop extension brackets, brake hose relocation brackets, rear lift and all the necessary hardware is included to make certain this package is complete with everything you need to the job right.

Features

  • Replacement Front coil springs improve ride quality while rear blocks maintain load capacity
  • High Clearance Replacement Radius Arms with Cleveite OE Style rubber bushings
  • Track bar relocation bracket prevents stud bind and steering wheel kick
  • Front and Rear Shocks: Fox 2.0 Reservoir Shocks
  • Backed by our limited lifetime warranty
  • Retains OEM caster and camber alignment specifications
  • Maintains ride quality and handling characteristics
  • Designed using Original Equipment (OE) CAD data for accuracy

Install Time

Installation time: 6-7 hours
Difficulty level: 3 of 5

Notes

  • If equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required
  • If equipped with factory top mount overload leaf springs, longer U-bolts are required. U-Bolt 4 Pack will need to be purchased in addition to the lift kit. If truck equipped with 3.71 inch block and top mount overloads, U-Bolt 4 pack is required
View AllClose

Related Products

Related Products