Superlift
SUPERLIFT 6" Lift Kit - 00-04 F-250/F-350 4WD - Diesel/V10 - w/ SL Shocks
- SKU:
- K638-SUP
- Shipping:
- Calculated at Checkout
Description
Features
- Springs incorporate military-wrapped spring eyes and anti-friction pads between leafs.
- Track bar relocation bracket prevents steering wheel "kick".
- New front anti-sway bar hardware maintain factory bar geometry.
- Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated.
- Rear lift via 5" blocks Front and Rear shocks included.
Install Time
6 hoursDifficulty level: 3 of 5
Notes
- This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us.
- Front leaf springs
- Track bar bracket
- Sway bar correction
- Drop pitman arm
- Shocks
- rear block
- add-a-leaf
- U-bolt kit
- All hardware required specific to the 2000-2004 or 1999 4WD Ford F-250 Made on or after 3-1-99.
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.
Features
- Springs incorporate military-wrapped spring eyes and anti-friction pads between leafs.
- Track bar relocation bracket prevents steering wheel "kick".
- New front anti-sway bar hardware maintain factory bar geometry.
- Functional front compression travel stops prevent over-compression and provide a more progressive spring rate; factory rear travel-stops are relocated.
- Rear lift via 5" blocks Front and Rear shocks included.
Install Time
6 hoursDifficulty level: 3 of 5
Notes
- This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250/F-350 pickups with the factory 1 7/8" blocks without top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required and is available from us.