null
Superlift

SUPERLIFT 6" Lift Kit - 06-07 Ram 2500/3500 4WD - 5.9L Cummins Diesel - w/ Bilstein Shocks

(No reviews yet) Write a Review
SKU:
K823B-SUP
Shipping:
Calculated at Checkout
$1,869.99

Description

Superlift's complete coil spring suspension lift kit for the 2006-2007 Dodge Ram 2500/3500 4wd - 5.9L diesel engine; providing 6" lift height.

  • Coil springs are pre-set to minimize settling.
  • Brackets constructed from .25" thick plate steel.
  • Track bar relocation bracket prevents stud bind and steering wheel kick.
  • Pitman arm relieves drag link angle to prevent bump steer/wandering.
  • Heavy-duty replacement upper and lower links maintain desired caster angle.
  • New front, and relocated rear, compression travel stops prevent suspension over-compression.
  • New anti-sway bar drop brackets prevent bar pre- load.
  • Superlift or Bilstein shocks included.
The coil sprung, solid axle Ram HD will always be a favorite of the Superlift Nation, and for good reason. The suspension platform is "lift friendly", the drivetrain durable, and the Cummins diesel provides more than adequate torque for large rubber.

Over the years, Superlift has established a reputation as the "go to" source for Ram HD suspension. How did we earn this? Our ideal engine-specific coil spring rates and shock valving have something to do with it. As does the superb steering mannerisms that are a result of ideal caster settings, and correct track bar/pitman arm phasing. Properly addressing things that generally go unaddressed by others, yet matter, like suspension compression travel control. It adds up. Let us show you just how satisfying your lifted HD experience can be.

The 6" lift begins with new engine-specific pre-set coil springs. A dropped pitman arm for steering correction works in concert with our track bar relocation bracket. New upper and lower front axle-to-frame link arms restore factory alignment specifications. Specially designed, suspension compression travel bump-stops are also provided. Lift blocks raise the rear 4" to negate the factory nose-down stance.

Install Time

7 hours
Difficulty level: 3 of 5

Notes


  • Also fits Ram 1500, 2500, 3500 Mega Cab.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket, part number 4668.

Notes


  • Also fits Ram 1500, 2500, 3500 Mega Cab.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket, part number 4668.

  • Front coil springs
  • Track bar bracket
  • upper and lower control arms
  • Sway bar correction
  • Drop pitman arm
  • Shocks
  • Rear block
  • U-bolt kit
  • Hardware
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

Superlift's complete coil spring suspension lift kit for the 2006-2007 Dodge Ram 2500/3500 4wd - 5.9L diesel engine; providing 6" lift height.

  • Coil springs are pre-set to minimize settling.
  • Brackets constructed from .25" thick plate steel.
  • Track bar relocation bracket prevents stud bind and steering wheel kick.
  • Pitman arm relieves drag link angle to prevent bump steer/wandering.
  • Heavy-duty replacement upper and lower links maintain desired caster angle.
  • New front, and relocated rear, compression travel stops prevent suspension over-compression.
  • New anti-sway bar drop brackets prevent bar pre- load.
  • Superlift or Bilstein shocks included.
The coil sprung, solid axle Ram HD will always be a favorite of the Superlift Nation, and for good reason. The suspension platform is "lift friendly", the drivetrain durable, and the Cummins diesel provides more than adequate torque for large rubber.

Over the years, Superlift has established a reputation as the "go to" source for Ram HD suspension. How did we earn this? Our ideal engine-specific coil spring rates and shock valving have something to do with it. As does the superb steering mannerisms that are a result of ideal caster settings, and correct track bar/pitman arm phasing. Properly addressing things that generally go unaddressed by others, yet matter, like suspension compression travel control. It adds up. Let us show you just how satisfying your lifted HD experience can be.

The 6" lift begins with new engine-specific pre-set coil springs. A dropped pitman arm for steering correction works in concert with our track bar relocation bracket. New upper and lower front axle-to-frame link arms restore factory alignment specifications. Specially designed, suspension compression travel bump-stops are also provided. Lift blocks raise the rear 4" to negate the factory nose-down stance.

Install Time

7 hours
Difficulty level: 3 of 5

Notes


  • Also fits Ram 1500, 2500, 3500 Mega Cab.
  • If equipped with a two-piece driveshaft, also order carrier bearing drop bracket, part number 4668.

View AllClose

Additional Information

View AllClose

Related Products

Related Products