null
Superlift

SUPERLIFT 6" Lift Kit - 11-16 F-250/F-350 4WD - Diesel - w/ Bilstein Shocks

(No reviews yet) Write a Review
SKU:
K878B-SUP
Shipping:
Calculated at Checkout
$1,649.99

Description

This is the Superlift 6" suspension lift kit with Superlift shocks OR Bilstein Shocks for the 2011-2016 Ford F-250 and F-350 Super Duty 4WD - Diesel Engine.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, pitman arm, front sway bar correction, bump stop extension brackets, brake hose relocation brackets. The OE radius arms are relocated to provide the proper caster correction.

The rear lift and all the necessary hardware is included to make certain this package is complete with everything you need to do the job right.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • If the Ford F-250 or F-350 Super Duty is equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required. Part # 9669.

  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 and F-350 Super Duty with the factory 1-7/8" blocks WITHOUT top mount overloads. If your Ford is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. For Super Duty's equipped with the 1-7/8" blocks and top overloads, part # 11734 will need to be purchased in addition to the lift kit. If the truck is equipped with the 3.71" block and the top mount overloads, it is recommended that the 3.71" block is replaced with the 1-7/8" block or the block provided with the lift kit be replaced with a slightly shorter block. If the Ford Pickup has this combination, call our Technical Team.

Notes


  • If the Ford F-250 or F-350 Super Duty is equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required. Part # 9669.

  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 and F-350 Super Duty with the factory 1-7/8" blocks WITHOUT top mount overloads. If your Ford is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. For Super Duty's equipped with the 1-7/8" blocks and top overloads, part # 11734 will need to be purchased in addition to the lift kit. If the truck is equipped with the 3.71" block and the top mount overloads, it is recommended that the 3.71" block is replaced with the 1-7/8" block or the block provided with the lift kit be replaced with a slightly shorter block. If the Ford Pickup has this combination, call our Technical Team.

  • Front coil springs
  • Track bar bracket
  • Radius arm brackets
  • Sway bar correction
  • Drop pitman arm
  • Shocks
  • Rear block
  • U-bolt kit
  • Hardware
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation.

This is the Superlift 6" suspension lift kit with Superlift shocks OR Bilstein Shocks for the 2011-2016 Ford F-250 and F-350 Super Duty 4WD - Diesel Engine.

OEM CAD models and the latest 3D design software were used to precision engineer a suspension system that includes a track bar relocation bracket, pitman arm, front sway bar correction, bump stop extension brackets, brake hose relocation brackets. The OE radius arms are relocated to provide the proper caster correction.

The rear lift and all the necessary hardware is included to make certain this package is complete with everything you need to do the job right.

Install Time

8 hours
Difficulty level: 3 of 5

Notes


  • If the Ford F-250 or F-350 Super Duty is equipped with a 2-piece rear drive shaft, a carrier bearing spacer is required. Part # 9669.

  • This lift kit is packaged with rear blocks and u-bolts that are configured for the Ford F-250 and F-350 Super Duty with the factory 1-7/8" blocks WITHOUT top mount overloads. If your Ford is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. For Super Duty's equipped with the 1-7/8" blocks and top overloads, part # 11734 will need to be purchased in addition to the lift kit. If the truck is equipped with the 3.71" block and the top mount overloads, it is recommended that the 3.71" block is replaced with the 1-7/8" block or the block provided with the lift kit be replaced with a slightly shorter block. If the Ford Pickup has this combination, call our Technical Team.

View AllClose

Additional Information

View AllClose

Related Products

Related Products