null
Superlift

SUPERLIFT 6" Lift Kit - 11-19 Silverado/Sierra 2500/3500HD 4WD - Knuckle Kit w/ Bilstein Shocks

(No reviews yet) Write a Review
SKU:
K150B-SUP
Shipping:
Calculated at Checkout
$2,479.99

Description

Superlift's 6-inch lift kit utilizes "No Drop" torsion bar relocation brackets that keeps the torsion bar crossmember raised up and in the stock location. This design maximizes ground clearance at the frame for a clean look and prevents damaging the torsion bar assembly while off-roading.

Precision CNC machined steering knuckles and heavy duty lower control arm crossmembers insure your Silverado or Sierra will have, and maintain perfect alignment specifications.

The rear lift is achieved with a heavy duty fabricated Rear block kit. The primary axle ubolts are captured in the upper and lower plates and the secondary ubolts attach to the OE leaf spring to reduce pinion wrap.

Install Time

8 to 9 Hours
Difficulty level: 4 of 5

Notes


  • Does Not work with Factory Wheels
  • Does not fit MagneRide equipped trucks
  • Does not fit Dually models

Notes


  • Does Not work with Factory Wheels
  • Does not fit MagneRide equipped trucks
  • Does not fit Dually models

  • Steering knuckles
  • Crossmembers
  • "No Drop" torsion bar brackets
  • Bump stops
  • Belly pan
  • Brakeline brackets
  • Front sway bar links
  • Hardware
  • Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation

Superlift's 6-inch lift kit utilizes "No Drop" torsion bar relocation brackets that keeps the torsion bar crossmember raised up and in the stock location. This design maximizes ground clearance at the frame for a clean look and prevents damaging the torsion bar assembly while off-roading.

Precision CNC machined steering knuckles and heavy duty lower control arm crossmembers insure your Silverado or Sierra will have, and maintain perfect alignment specifications.

The rear lift is achieved with a heavy duty fabricated Rear block kit. The primary axle ubolts are captured in the upper and lower plates and the secondary ubolts attach to the OE leaf spring to reduce pinion wrap.

Install Time

8 to 9 Hours
Difficulty level: 4 of 5

Notes


  • Does Not work with Factory Wheels
  • Does not fit MagneRide equipped trucks
  • Does not fit Dually models

View AllClose

Additional Information

View AllClose

Related Products

Related Products