Superlift
SUPERLIFT High Clearance Steering Stabilizer Kit SS by Bilstein (Gas Pressure) | 07-18 Jeep Wrangler JK 2/4 Door 4WD
- SKU:
- 92135-SUP
- Shipping:
- Calculated at Checkout
Description
The kit includes a single SUPERLIFT SS cylinder, plus hardware to relocate the cylinder to above the tie rod, providing improved protection from rocks and other hazards. The cylinder's seamless, extruded monotube body contains a patented piston design, and a high-pressure gas charge to quickly dissipate heat and virtually eliminate fade. Cylinder valving is tailored to meet the demands of heavier tires/wheels and aggressive terrain.
The cylinder features a brushed, silver Zinc finish.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
The cylinder features a brushed, silver Zinc finish.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
Features
- This is an OE replacement SUPERLIFT steering stabilizer cylinder by Bilstein
- Bilstein cylinders have a gas pressure for maximum dampening
- Stabilizers help combat forces that induce tire shimmy, such as larger/heavier tires and wheels, and slack in your suspension and steering systems that occurs from normal wear
Install time:
Installation time: 0.5 hour
Difficulty level: 1 of 5
Difficulty level: 1 of 5
Notes
- Superide shock boots will not fit Superide SS cylinders
- Will NOT fit stock height. The vehicle must have a minimum of 1.5" of lift for adequate clearance
- 2007-2017 Jeep Wrangler 2 Door 4WD
- 2007-2017 Jeep Wrangler 4 Door 4WD
- 2018 Jeep Wrangler JK 2 Door 4WD
- 2018 Jeep Wrangler JK 4 Door 4WD
- Single SUPERLIFT stabilizer cylinder, brackets, and all mounting hardware needed for installation
- Detailed instruction manual walking you step-by-step through the lift kit installation procedures suitable for do-it-yourselfers (DIY) or professional installation
The kit includes a single SUPERLIFT SS cylinder, plus hardware to relocate the cylinder to above the tie rod, providing improved protection from rocks and other hazards. The cylinder's seamless, extruded monotube body contains a patented piston design, and a high-pressure gas charge to quickly dissipate heat and virtually eliminate fade. Cylinder valving is tailored to meet the demands of heavier tires/wheels and aggressive terrain.
The cylinder features a brushed, silver Zinc finish.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
The cylinder features a brushed, silver Zinc finish.
A steering stabilizer is basically a shock absorber for your steering system. It allows unrestricted gradual movement but resists sudden shock. Stabilizers also combat other forces that induce tire shimmy, such as larger/heavier tires and wheels and slack in your suspension and steering systems that occur from normal wear.
Most vehicles are factory equipped with a stabilizer, yet like most factory shock absorbers, they are barely adequate and have a limited service life. Look for signs of oil leakage where the shaft meets the cylinder body.
Features
- This is an OE replacement SUPERLIFT steering stabilizer cylinder by Bilstein
- Bilstein cylinders have a gas pressure for maximum dampening
- Stabilizers help combat forces that induce tire shimmy, such as larger/heavier tires and wheels, and slack in your suspension and steering systems that occurs from normal wear
Install time:
Installation time: 0.5 hour
Difficulty level: 1 of 5
Difficulty level: 1 of 5
Notes
- Superide shock boots will not fit Superide SS cylinders
- Will NOT fit stock height. The vehicle must have a minimum of 1.5" of lift for adequate clearance
- 2007-2017 Jeep Wrangler 2 Door 4WD
- 2007-2017 Jeep Wrangler 4 Door 4WD
- 2018 Jeep Wrangler JK 2 Door 4WD
- 2018 Jeep Wrangler JK 4 Door 4WD