TeraFlex Falcon SP2 3.5 e-Adjust Piggyback Shock Kit | 2-3" Lift (20-23 Jeep Gladiator JT)

Notes

• 2-3" Lift
• Does NOT fit EcoDiesel models
• Upgradeable to 3.5 aDAPT via Cartridge Upgrade Kits for quick compression adjustments. Sold separately - contact customer service for details.
• Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders - See instructions for proper configuration for your application.

• SP2 3.5 e-Adjust Piggyback Shocks - all 4
• In-Cab Switch and wiring
• Rear Roost Guards - pair
• All necessary hardware

Features

• SP2 3.5 e-Adjust Piggyback Shocks offer a wide range of adjustability for specific terrain and/or handling characteristics
• Manually adjust from Soft to Firm with the In-Cab Switch
• The desired Firm setting is controlled manually by the 8-Position Dial
• SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
• Ideal for daily-driven Jeeps as well as the serious enthusiast wanting to adjust damping from the driver seat
• Upgradeable to 3.5 aDAPT via Cartridge Upgrade Kits for quick compression adjustments. Sold separately
• JT corner-specific shock absorber w/ race-inspired performance
• Front lower offset eyelet design provides maximum shock body to frame clearance during articulation
• Rear Roost Guards prevent shock shaft damage from rocks kicked up by the tires
• SP2 Mode Adjust tunes compression and rebound for Soft or Performance settings
• Piggyback design increases oil and gas capacity for reduced heat
• Flows 6x more oil than restrictive reservoir hose designs
• Eliminates common leakage issues found in banjo and swivel fittings
• Front shocks' unique horizontal piggyback reservoir increases tire clearance
• Cartridge Upgrade Kits are available separately - contact customer service for details
• Choose between Soft and Performance modes during install
• Tunes both compression and rebound
• Soft mode allows a partial bypass of the main piston for a softer ride
• During aggressive driving, Soft mode retains performance tuning for optimal handling
• Soft mode recommended for rough terrain/surfaces and cold weather
• Performance mode recommended for max on- and off-road handling, stability, and control
• Vehicle-specific shock absorbers
• Race-inspired performance for increased vehicle stability
• Improved dynamic roll control and low-speed damping
• Dramatic improvement in on-road comfort and off-road performance
• Optimized fitment for unobstructed suspension travel and articulation
• 2.3" shock body provides optimal performance
• 6061-T6 aluminum alloy shock body resists Impact to protect internal components
• Smooth honed internal shock body surface for long-term performance
• 3/4" induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling
• Large shaft diameter provides a wide range of adjustment on adjustable shocks
• Hard anodized 6061-T6 aluminum alloy billet piston 
• 1-piece Teflon bronze piston wear band w/ O-ring
• VOD (Volume Optimized Damping) features a digressive linear piston for quicker ramp-up and increased damping volume
• VOD reduces shock bottoming at full compression or over uneven terrain
• OGS (Oil/Gas Separator) prevents cavitation
• High-viscosity, full synthetic Red Line shock oil for consistent performance across all temperatures
• Synthetic formula also contains special anti-wear and lubricity agents
• 1,000-hour salt spray corrosion resistance test on all hardware
• Serviceable and rebuildable (factory serviced)
• Designed, engineered, and assembled in-house from domestic and globally sourced components
• Patented design
• 3-year warranty

Notes

• 2-3" Lift
• Does NOT fit EcoDiesel models
• Upgradeable to 3.5 aDAPT via Cartridge Upgrade Kits for quick compression adjustments. Sold separately - contact customer service for details.
• Bump stop configuration varies depending on shock absorber collapsed length, tire size, and fenders - See instructions for proper configuration for your application.