Teraflex
TeraFlex High Steer HD Aluminum Tie Rod Kit - Offset Stock Taper Ends (97-06 Jeep Wrangler TJ)
- SKU:
- 4920251-TF
- Shipping:
- Calculated at Checkout
Description
Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ-s stock steering to a cross steering or a flipped steering setup. Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy bump steer and other alignment issues. Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle and TJ: High Steer HD Aluminum Tie Rod Kit
Features
- Bolts directly to new High Steer Knuckle
- Can be used to convert to cross steering or over the knuckle for flipped steering
- Helps eliminate front end shimmy and other alignment issues
- Extruded drag link eliminates excess flex during binding and high load steering maneuvers
- Constructed from 1.5" hexagonal 6061-T6 aluminum - higher specific strength than 1018 steel
- Yield strength of 45,000 lbs., yet 1/3 the weight of steel
- Aluminum construction deflects 3x further than steel allowing for return to its original shape
- Hexagon shape allows tightening of jam nuts w/ 1.5" wrench
- Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing
Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ-s stock steering to a cross steering or a flipped steering setup. Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy bump steer and other alignment issues. Requires the TeraFlex TJ: Dana 30/44 High Steer Knuckle and TJ: High Steer HD Aluminum Tie Rod Kit
Features
- Bolts directly to new High Steer Knuckle
- Can be used to convert to cross steering or over the knuckle for flipped steering
- Helps eliminate front end shimmy and other alignment issues
- Extruded drag link eliminates excess flex during binding and high load steering maneuvers
- Constructed from 1.5" hexagonal 6061-T6 aluminum - higher specific strength than 1018 steel
- Yield strength of 45,000 lbs., yet 1/3 the weight of steel
- Aluminum construction deflects 3x further than steel allowing for return to its original shape
- Hexagon shape allows tightening of jam nuts w/ 1.5" wrench
- Tie rod end features 4140 chromoly ball/stud and 1045 carbon steel housing