null
Tuff Country

Tuff Country 3" Lift Kit (2014 Ford F-150 | 2WD/4WD)

(No reviews yet) Write a Review
SKU:
TUFF-23010
Shipping:
Calculated at Checkout
$677.39

Description

Get your F150 in the air with this easy to install, high quality suspension lift. Tuff Country's 3 inch lift kit for the Ford F150 will allow you to fit up to 35 inch x 11.5 inch tires (with minor trimming) while keeping a factory ride. A combination of upper coil/strut spacers and upper control arms are used to lift the front of the F150 3 inches.

This maintains the factory front end geometry to avoid any increased wear and tear. The rear end is lifted using 3 inch cast iron lift blocks and extended u-bolts (1 inch factory blocks are replaced). No drilling is required and the factory shocks and struts do not need to be replaced.

Features


  • 3 Inch Lift Kit
  • Maintains a factory ride
  • Upper control arms maintain factory geometry
  • Extended shocks and front struts are Not required
  • Rear 3 inch blocks installed under stock rear leaf springs
  • Allows use of 33 x 12.5 inch tires (with no trimming required) or 35 x 11.5 inch tires (with minor trimming of front bumper plastic valance)
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Proudly Made in the USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • New extended rear shocks are not required to install this leveling kit properly, but recommended
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Recommended Tire Size: 33 inch x 12.5 inch or 35 inch x 11.5 inch (with trimming)
  • Recommended Wheel Backspacing: 5 inches or less
  • Amount of Lift: 3 Inch Front / 2 Inch Rear
(2) Front upper coil spacers
(2) Uni-Ball Upper Control Arms
(2) Pre-load spacers
(2) 3 inch cast iron blocks
(4) Extended rear u-bolts
(2) Hardware bags
Get your F150 in the air with this easy to install, high quality suspension lift. Tuff Country's 3 inch lift kit for the Ford F150 will allow you to fit up to 35 inch x 11.5 inch tires (with minor trimming) while keeping a factory ride. A combination of upper coil/strut spacers and upper control arms are used to lift the front of the F150 3 inches.

This maintains the factory front end geometry to avoid any increased wear and tear. The rear end is lifted using 3 inch cast iron lift blocks and extended u-bolts (1 inch factory blocks are replaced). No drilling is required and the factory shocks and struts do not need to be replaced.

Features


  • 3 Inch Lift Kit
  • Maintains a factory ride
  • Upper control arms maintain factory geometry
  • Extended shocks and front struts are Not required
  • Rear 3 inch blocks installed under stock rear leaf springs
  • Allows use of 33 x 12.5 inch tires (with no trimming required) or 35 x 11.5 inch tires (with minor trimming of front bumper plastic valance)
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Proudly Made in the USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • New extended rear shocks are not required to install this leveling kit properly, but recommended
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Recommended Tire Size: 33 inch x 12.5 inch or 35 inch x 11.5 inch (with trimming)
  • Recommended Wheel Backspacing: 5 inches or less
  • Amount of Lift: 3 Inch Front / 2 Inch Rear
View AllClose

Additional Information

View AllClose