null
Tuff Country

Tuff Country 3" Uni-Ball Lift Kit (2014 Ford F-150 | 2WD/4WD)

(No reviews yet) Write a Review
SKU:
TUFF-23015
Shipping:
Calculated at Checkout
$854.70

Description

Tuff Country's Uni-Ball lift kit for the Ford F150 will allow for use of up to 35 inch x 11.5 inch tires (with minor trimming) while keeping a factory ride. This performance version of their 3 inch lift kit uses upper control arms w/uni-ball joints for greater suspension travel, extreme durabilty and elimination of binding that regular ball joints can cause.

The rear end is lifted using 3 inch cast iron lift blocks and extended u-bolts (1 inch factory blocks are replaced). No drilling is required and the factory shocks and struts do not need to be replaced.

Features


  • 3 Inch Uni-Ball Lift Kit
  • Allows use of 33 x 12.5 inch tires (with no trimming required) or 35 x 11.5 inch tires (with minor trimming of front bumper plastic valance)
  • Upper control arms w/uni-ball joints for added suspension travel and durability
  • High quality teflon-lined FK uni-ball joints
  • 30 to 35 Percent more articulation than standard ball joints
  • Eliminates binding caused by standard ball joints
  • No drilling, cutting or welding required, simple installation
  • Upper coil / strut spacers maintain a near factory ride
  • Factory front struts can be retained
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Proudly Made in the USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • New extended rear shocks are not required to install this leveling kit properly, but recommended
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Recommended Tire Size: 33 inch x 12.5 inch or 35 inch x 11.5 inch (with trimming)
  • Recommended Wheel Backspacing: 5 inches or less
  • Amount of Lift: 3 Inch Front / 2 Inch Rear
(2) Front upper coil spacers
(2) Uni-Ball Upper Control Arms
(2) Pre-load spacers
(2) 3 inch cast iron blocks
(4) Extended rear u-bolts
(2) Hardware bags
Tuff Country's Uni-Ball lift kit for the Ford F150 will allow for use of up to 35 inch x 11.5 inch tires (with minor trimming) while keeping a factory ride. This performance version of their 3 inch lift kit uses upper control arms w/uni-ball joints for greater suspension travel, extreme durabilty and elimination of binding that regular ball joints can cause.

The rear end is lifted using 3 inch cast iron lift blocks and extended u-bolts (1 inch factory blocks are replaced). No drilling is required and the factory shocks and struts do not need to be replaced.

Features


  • 3 Inch Uni-Ball Lift Kit
  • Allows use of 33 x 12.5 inch tires (with no trimming required) or 35 x 11.5 inch tires (with minor trimming of front bumper plastic valance)
  • Upper control arms w/uni-ball joints for added suspension travel and durability
  • High quality teflon-lined FK uni-ball joints
  • 30 to 35 Percent more articulation than standard ball joints
  • Eliminates binding caused by standard ball joints
  • No drilling, cutting or welding required, simple installation
  • Upper coil / strut spacers maintain a near factory ride
  • Factory front struts can be retained
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Proudly Made in the USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • New extended rear shocks are not required to install this leveling kit properly, but recommended
  • Requires aftermarket wheels with 5 inch backspacing or less
  • Recommended Tire Size: 33 inch x 12.5 inch or 35 inch x 11.5 inch (with trimming)
  • Recommended Wheel Backspacing: 5 inches or less
  • Amount of Lift: 3 Inch Front / 2 Inch Rear
View AllClose

Additional Information

View AllClose

Related Products

Related Products