Tuff Country
Tuff Country 4.5" Lift Kit w/SX8000 Shocks (94-00 Dodge Ram 1500 | 4WD)
- SKU:
- TUFF-35912KN
- Shipping:
- Calculated at Checkout
Description
Get additional tire clearance to fit 35 inch tires and get a cool new look with this Tuff Country Dodge Ram 4.5 inch lift kit. This Dodge lift kit uses coil spring tower brackets that mount above your factory coil springs to lift the front end. Rear cast iron blocks (replace the factory blocks) and rear add-a-leafs lift the rear of the Dodge Ram.
The advantage of using the coil tower brackets is you maintain a factory ride while being securely bolted in above your factory coil springs. Extended upper and lower control arms w/poly bushings, a track bar relolcating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly.
Features
- 4.5 Inch Lift Kit w/ SX8000 Shocks
- Upper and lower control arms included to maintain proper alignment
- Upper coil spring tower brackets retain a factory ride
- Pitman arm included
- New track bar bracket included
- Allows use of 35 inch x 12.5 inch tires
- Proudly Made in the USA
- Limited Lifetime Warranty
- Sold As A Kit
Notes
- Factory length shocks must be replaced with new extended shocks to install this lift kit properly
- Will not fit with the Off Road models
- Recommended Tire Size: 35 Inch x 12.5 Inch
- Amount of Lift: 4.5 Inch Front / 4 Inch Rear
(2) Upper control arms
(2) Lower control arms
(1) track bar bracket
(2) sway bar drop brackets
(1) Track bar support bracket
(2) Rear add-a-leafs
(2) 5.5 inch rear lift block (replaces factory block)
(4) U-bolts
(1) Pitman arm and required hardware
(4) SX8000 Shocks
Get additional tire clearance to fit 35 inch tires and get a cool new look with this Tuff Country Dodge Ram 4.5 inch lift kit. This Dodge lift kit uses coil spring tower brackets that mount above your factory coil springs to lift the front end. Rear cast iron blocks (replace the factory blocks) and rear add-a-leafs lift the rear of the Dodge Ram.
The advantage of using the coil tower brackets is you maintain a factory ride while being securely bolted in above your factory coil springs. Extended upper and lower control arms w/poly bushings, a track bar relolcating bracket, drop pitman arm and front sway bar relocating brackets ensure everything is aligned properly.
Features
- 4.5 Inch Lift Kit w/ SX8000 Shocks
- Upper and lower control arms included to maintain proper alignment
- Upper coil spring tower brackets retain a factory ride
- Pitman arm included
- New track bar bracket included
- Allows use of 35 inch x 12.5 inch tires
- Proudly Made in the USA
- Limited Lifetime Warranty
- Sold As A Kit
Notes
- Factory length shocks must be replaced with new extended shocks to install this lift kit properly
- Will not fit with the Off Road models
- Recommended Tire Size: 35 Inch x 12.5 Inch
- Amount of Lift: 4.5 Inch Front / 4 Inch Rear