null
Tuff Country

Tuff Country 4" Uni-Ball Lift Kit w/SX8000 Shocks (07-21 Toyota Tundra | 2WD/4WD)

(No reviews yet) Write a Review
SKU:
TUFF-54075KN
Shipping:
Calculated at Checkout
$765.42

Description

Tuff Country's Uni-Ball lift kit for the Toyota Tundra will allow for use of up to 35 inch tires (with minor trimming) and gives additional fender clearance. This performance version of their 4 inch lift kit uses upper control arms w/uni-ball joints for greater suspension travel, extreme durabilty and elimination of binding that regular ball joints can cause.

The rear is lifted using 2 inch lift block and extended u-bolts. Installation is straight forward with no holes to drill. Tuff Country has been producing quality suspension products for over 25 years and backs all lift kits with a limited lifetime warranty.

Features


  • 4 Inch Tundra Uni-Ball Lift Kit w/ SX8000 Rear Shocks
  • Allows use of 33 inch x 12.5 inch tires (with no trimming required) or 35 inch x 11.5 inch tires (with minor trimming of body mounts)
  • Upper control arms w/uni-ball joints for added suspension travel and durability
  • High quality teflon-lined FK uni-ball joints
  • 30 to 35 percent more articulation than standard ball joints
  • Eliminates binding caused by standard ball joints
  • No drilling, cutting or welding required, simple installation
  • Upper coil / strut spacers maintain a near factory ride
  • Factory front struts can be retained
  • Extended shocks or shock extensions required
  • Proudly Made In The USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Front struts can be retained
  • Tuff Country recommends a 33 inch x 12.5 inch tires (with no trimming required) or 35 inch x 11.5 inch tires (with minor trimming of the body mounts) with a wheel that has a back spacing of 5.5 inches or less. The stock tires and wheels can be used in conjunction with this lift kit. If a wider tire is installed on the stock wheel, contact with the upper control arm will occur, and is not recommended.
  • Excludes TRD Pro
  • Amount of Lift: 4 Inches Front / 2 Inches Rear
(2) Uni-Ball upper control ams
(2) Upper strut spacers
(2) Pre-load spacers
(2) Sway bar drop brackets
(2) Rear brake cable drop brackets
(2) Rear lift blocks
(4) Extended U-bolts
(1) Hardware bag
(2) Rear SX8000 Shocks
Tuff Country's Uni-Ball lift kit for the Toyota Tundra will allow for use of up to 35 inch tires (with minor trimming) and gives additional fender clearance. This performance version of their 4 inch lift kit uses upper control arms w/uni-ball joints for greater suspension travel, extreme durabilty and elimination of binding that regular ball joints can cause.

The rear is lifted using 2 inch lift block and extended u-bolts. Installation is straight forward with no holes to drill. Tuff Country has been producing quality suspension products for over 25 years and backs all lift kits with a limited lifetime warranty.

Features


  • 4 Inch Tundra Uni-Ball Lift Kit w/ SX8000 Rear Shocks
  • Allows use of 33 inch x 12.5 inch tires (with no trimming required) or 35 inch x 11.5 inch tires (with minor trimming of body mounts)
  • Upper control arms w/uni-ball joints for added suspension travel and durability
  • High quality teflon-lined FK uni-ball joints
  • 30 to 35 percent more articulation than standard ball joints
  • Eliminates binding caused by standard ball joints
  • No drilling, cutting or welding required, simple installation
  • Upper coil / strut spacers maintain a near factory ride
  • Factory front struts can be retained
  • Extended shocks or shock extensions required
  • Proudly Made In The USA
  • Limited Lifetime Warranty
  • Sold As A Kit

Notes


  • Factory length shocks must be replaced with new extended rear shocks to install this lift kit properly. Front struts can be retained
  • Tuff Country recommends a 33 inch x 12.5 inch tires (with no trimming required) or 35 inch x 11.5 inch tires (with minor trimming of the body mounts) with a wheel that has a back spacing of 5.5 inches or less. The stock tires and wheels can be used in conjunction with this lift kit. If a wider tire is installed on the stock wheel, contact with the upper control arm will occur, and is not recommended.
  • Excludes TRD Pro
  • Amount of Lift: 4 Inches Front / 2 Inches Rear
View AllClose

Additional Information

View AllClose

Related Products

Related Products