null
Tuff Stuff

Tuff Stuff Overland Roof Top Tent Truck Bed Rack | Adjustable | Powder Coated 40"

(No reviews yet) Write a Review
SKU:
TS-UBR-PDR-40-TUFF
Shipping:
Calculated at Checkout
$499.99

Description

This rack is lean and mean and made to do a simple job, provide a lightweight platform for your RTT. If you have an annex room or awning you may need to consider a different tent mounting option.
Features:
  • We offer two Bed Rack sizes: 40" RTT Bed Rack (this item), 51" RTT Bed Rack
  • Due to this rack being universal (not made for any specific vehicle), we have included custom pinch plates that will pinch the inner lip of your bed rails. This allows the installation to be performed without drilling holes into the bed rails.
Notes:
  • Our bed rack WILL NOT FIT if you have a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.
  • Our rack uses a unique sliding center rail which allows the rack to be installed on various widths of beds from full-size Ford F350's to mid-size Toyota's.
  • For Toyota's using the factory-installed cargo rail system, our rack will perfectly align with your rail and would require the use of custom T-nuts that can accept 3/8" diameter bolts. These can be purchased as an add-on.
  • Important: Annex Rooms - Since this rack was designed to be a lightweight, mid-height rack, you will need to be cautious if using an annex room with your tent. Reason, our annex room requires 76"-79" of height to let their luscious locks out properly. So unless you have a lifted truck you better take some measurements before pulling the trigger on this riteous rack.
  • Important: Awnings - You know what a Muffin Top is? That's how your tent will fit on your rack. Your rack will be light and tight within the footprint of your tent so there will not be any room for an awning without modifications.
  • Important: Existing Tonneau - Our bed rack WILL NOT FIT if you have a tonneau cover, or any other accessories installed that affect the inner walls of the bed rails.
  • Important: Ford Raptor Bed - 1st generation Ford Raptor beds have no lip to attach the rack, so you will have to use nut inserts, self-drilling screws, or anchors to install the rack on the bed.
  • Dimensions L/W/H: 40 x 48 x 14.5 (max-width is 68 inches)
  • Distance from bar-to-bar: 48 inches
  • Distance from top of bed rail to top of rack: 14.5"
  • Distance from top of bed rail to bottom of rack: 13"
  • Min Width: 40"
  • Max Width: 68"
  • Tube diameter: 1.5" (the center adjustable tube is 1.25")
  • Crossbars: 2 Qty
  • Capacity Static: 800 lbs
  • Capacity Dynamic (Driving down the road): 650 lbs 
  • Powder-coated steel for a long-lasting finish and protection
View AllClose

Additional Information

Universal Product:
Yes
View AllClose

Related Products

Related Products