null
Wilwood

Wilwood TX6R Big Brake Truck Front Brake Kit 15.50in w/Lines | 6 Lug | Black (17-19 Ford F-150 Raptor | 14 SVT Raptor)

(No reviews yet) Write a Review
SKU:
140-15887-WIL
Shipping:
Calculated at Checkout
$2,870.89

Description

Wilwood's Tactical Extreme TX6R Big Brake kits are ultimate in braking performance for Truck, SUV and Armored Vehicles. Using TX6R radial mount six-piston calipers and massive 15.00" to 16.00" GT-60 directional vane Spec-37 alloy rotors, these kits deliver consistent stopping power and extreme duty durability under sustained high heat with this ready to bolt-on kit. The calipers are volume matched for compatibility with original equipment power brake system output. Kits include radial mount caliper brackets, and all the necessary hardware to complete the installation. Braided stainless steel flex lines will need to be purchased for some applications.
Notes:
  • Brake Kits are designed to fit OE Factory Spindles
  • Brake kit installation requires aftermarket spherical tie rod end on vehicle to provide proper rotor clearance.
  • Min wheel diameter required: 20
  • Fits 6 Lug Models
2 - Bracket, Caliper Mounting 4 - Bolt, M16-2.00 x 45mm, Hex Head 4 - Washer, .640 I.D. x 1.188 O.D. x .063 Thick 12 - Shim, .024 Thick Left/Right Rotor, GT - 1.38" X 15.50" Dia, 12 x 10.25" Bolt Circle 2 - Hat / Big Brake, 6 x 5.315, .700 Offset, 12 x 10.25" Bolt Circle 24 - Bolt, 5/16-18 x 1.00 Long, Hex Head 24 - Washer, .328 I.D. x .562 O.D. x .063 Thick 2 - Caliper, TX6R, Black 4 - Nut, 1/2-20, Self-Locking, 12 Point 4 - Washer, .515 I.D. x .875 O.D. x .063 Thick 4 - Stud, 1/2-13 x 1/2-20 x 3.98 long (pre installed in bracket) 12 - Shim, .032 Thick 1 - Pad, BP-20 Compound, Axle Set 1 - Braided Stainless Steel Flexline Kit
Wilwood's Tactical Extreme TX6R Big Brake kits are ultimate in braking performance for Truck, SUV and Armored Vehicles. Using TX6R radial mount six-piston calipers and massive 15.00" to 16.00" GT-60 directional vane Spec-37 alloy rotors, these kits deliver consistent stopping power and extreme duty durability under sustained high heat with this ready to bolt-on kit. The calipers are volume matched for compatibility with original equipment power brake system output. Kits include radial mount caliper brackets, and all the necessary hardware to complete the installation. Braided stainless steel flex lines will need to be purchased for some applications.
Notes:
  • Brake Kits are designed to fit OE Factory Spindles
  • Brake kit installation requires aftermarket spherical tie rod end on vehicle to provide proper rotor clearance.
  • Min wheel diameter required: 20
  • Fits 6 Lug Models
View AllClose

Related Products

Related Products