null
Zone

Zone 4.5" lift Kit | For OEM Cast Steel Control Arms | 14-18 Chevy/GMC Truck 1500 2WD

(No reviews yet) Write a Review
SKU:
ZONC35-ZN
Shipping:
Calculated at Checkout
$847.90

Description

The 4.5'' system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 4' blocks, u-bolts, and all the necessary hardware to complete the install.

Notes

  • Factory 17" and 18" wheels can not be used due to Tie Rod End interference.
  • Factory 20" wheels require a 1/4" wheel spacer to be reinstalled.
  • This Kit will only fit vehicles equipped with factory (Cast Steel Control Arms).

Notes

  • Factory 17" and 18" wheels can not be used due to Tie Rod End interference.
  • Factory 20" wheels require a 1/4" wheel spacer to be reinstalled.
  • This Kit will only fit vehicles equipped with factory (Cast Steel Control Arms).

Crossmembers
Differential Drop Brackets
Rear Lift Block and U-Bolts
Skid Plate
Steering Knuckles
Strut Spacers
Sway Bar Relocation Brackets
The 4.5'' system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 4' blocks, u-bolts, and all the necessary hardware to complete the install.

Notes

  • Factory 17" and 18" wheels can not be used due to Tie Rod End interference.
  • Factory 20" wheels require a 1/4" wheel spacer to be reinstalled.
  • This Kit will only fit vehicles equipped with factory (Cast Steel Control Arms).

View AllClose