Zone 4.5" Suspension System | 2007-2013 Silverado Sierra 1500 2WD

This 4.5" suspension lift kit system for your 2007-13 Chevrolet 1500 Silverado & GMC 1500 Sierra 2WD pickups.

This 4.5" system will give you an offroad worthy truck that you can still use as a daily driver. Not only is this system over 90% Made in the USA, this system has many advantages over the competition including new coil over struts instead of strut spacers.

By replacing the struts, Zone Offroad enhances the valving to control the unsprung weight of a 33" tire for a drastic increase in ride and handling performance over simple strut spacers. The crossmembers are made from 1/4" thick steel and maintain a clean appearance. They are locked together with two strut bars to add rigidity.

The CNC machined ductile iron steering knuckles ensure proper steering and control arm geometry and do not limit you to 18" or larger wheels or require you to cut off the upper control arm droop limiter like the competition. By retaining the factory droop limit, you don't need to worry about excessive ball joint or steering component wear and be certain the system works with the truck's Stabilitrack System.

The differences don't end there, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks. If you need additional rear height, Zone offers a add-a-leaf to fight spring wrap and yield additional height.

Combine all of these factors and you can lock in the Zone 4.5" system as the best value out there! Your search has ended.

This 4.5" suspension lift kit system for your 2007-13 Chevrolet 1500 Silverado & GMC 1500 Sierra 2WD pickups.

This 4.5" system will give you an offroad worthy truck that you can still use as a daily driver. Not only is this system over 90% Made in the USA, this system has many advantages over the competition including new coil over struts instead of strut spacers.

By replacing the struts, Zone Offroad enhances the valving to control the unsprung weight of a 33" tire for a drastic increase in ride and handling performance over simple strut spacers. The crossmembers are made from 1/4" thick steel and maintain a clean appearance. They are locked together with two strut bars to add rigidity.

The CNC machined ductile iron steering knuckles ensure proper steering and control arm geometry and do not limit you to 18" or larger wheels or require you to cut off the upper control arm droop limiter like the competition. By retaining the factory droop limit, you don't need to worry about excessive ball joint or steering component wear and be certain the system works with the truck's Stabilitrack System.

The differences don't end there, Zone Offroad only uses solid cast rear lift blocks as opposed to fabricated blocks. If you need additional rear height, Zone offers a add-a-leaf to fight spring wrap and yield additional height.

Combine all of these factors and you can lock in the Zone 4.5" system as the best value out there! Your search has ended.