null
Zone

Zone 5.5" Suspension System | 2014-2018 Ram 2500 (Gas)

(No reviews yet) Write a Review
SKU:
ZOND68-ZN
Shipping:
Calculated at Checkout
$1,008.70

Description

Zone Offroad Ram 2500 5.5" Suspension System. The newest Zone Offroad lift option for the new 2500 Ram follows the same design as the current 4.5" system. The system utilizes the same heavy-duty radius arm drop brackets to properly compensate for the massive 5.5" progressive rate coil springs.

The supplied drop pitman arm, extended bump stops, track bar relocation bracket, sway bar drops and brake line relocation adjust all the rest of the critical components and angles. The rear of the truck is lifted via 4.5" rear coil springs.

For those looking to use their 4wd on the road at speed we highly recommend adding the optional t-case indexing kit to improve the front driveline angles. These two kits (for the 6-bolt and 8-bolt T-cases) come with a t-case indexing ring, front driveshaft spacer and heavy-duty replacement transmission crossmember. The t-case indexing kits can be installed when the lift is installed or anytime after if the need arises. The indexing kits will also work with other lift heights and brands for those customers in need of one.

Quick Specs:
  • Front Lift Height: 5.5
  • Front Lift Method: Radius Arm Drop Brackets
  • Rear Lift Height: 4.5
  • Rear Lift Method: Coil Spring
  • Difficulty Level 1-5: 3
  • Wheel Size: 17x9+
  • Back Spacing: 4.5"
  • Max Tire Size: 35 X 12.50
  • Wheel Size: 17x9+
  • Back Spacing: 5.625"
  • Max Tire Size: 37 X 13.50

Features


  • Utilizes Heavy Duty Drop Brackets
  • Correct Suspension Geometry
  • Progressive Rate Coil Springs

Notes


  • Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
  • Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit D5405.
  • May require exhaust modification to clear the front driveshaft.
  • Not designed for factory rear airbag suspension models.
  • Will not fit Power Wagon models
  • Will not fit Diesel Models


Shipping Note: Due to current health restrictions and precautions, at this time all BDS, Zone and JKS products will carry a longer than normal shipping delay, around 2-5 weeks. We apologize for this inconvenience and are happy to answer any questions or concerns you may have regarding your order. If you are needing the product sooner, please contact our customer support team and we will be happy to try and accommodate your needs.
Zone Offroad Ram 2500 5.5" Suspension System. The newest Zone Offroad lift option for the new 2500 Ram follows the same design as the current 4.5" system. The system utilizes the same heavy-duty radius arm drop brackets to properly compensate for the massive 5.5" progressive rate coil springs.

The supplied drop pitman arm, extended bump stops, track bar relocation bracket, sway bar drops and brake line relocation adjust all the rest of the critical components and angles. The rear of the truck is lifted via 4.5" rear coil springs.

For those looking to use their 4wd on the road at speed we highly recommend adding the optional t-case indexing kit to improve the front driveline angles. These two kits (for the 6-bolt and 8-bolt T-cases) come with a t-case indexing ring, front driveshaft spacer and heavy-duty replacement transmission crossmember. The t-case indexing kits can be installed when the lift is installed or anytime after if the need arises. The indexing kits will also work with other lift heights and brands for those customers in need of one.

Quick Specs:
  • Front Lift Height: 5.5
  • Front Lift Method: Radius Arm Drop Brackets
  • Rear Lift Height: 4.5
  • Rear Lift Method: Coil Spring
  • Difficulty Level 1-5: 3
  • Wheel Size: 17x9+
  • Back Spacing: 4.5"
  • Max Tire Size: 35 X 12.50
  • Wheel Size: 17x9+
  • Back Spacing: 5.625"
  • Max Tire Size: 37 X 13.50

Features


  • Utilizes Heavy Duty Drop Brackets
  • Correct Suspension Geometry
  • Progressive Rate Coil Springs

Notes


  • Front driveline vibration may occur at speeds over 35 mph when in 4WD. If this occurs, install the appropriate optional t-case indexing kit. Models with a 6 bolt transfer case use part # D5623. Models with an 8 bolt transfer case use part #D5813.
  • Vehicles equipped with a two piece drive shaft and a carrier bearing require bearing drop kit D5405.
  • May require exhaust modification to clear the front driveshaft.
  • Not designed for factory rear airbag suspension models.
  • Will not fit Power Wagon models
  • Will not fit Diesel Models


Shipping Note: Due to current health restrictions and precautions, at this time all BDS, Zone and JKS products will carry a longer than normal shipping delay, around 2-5 weeks. We apologize for this inconvenience and are happy to answer any questions or concerns you may have regarding your order. If you are needing the product sooner, please contact our customer support team and we will be happy to try and accommodate your needs.
View AllClose

Additional Information

View AllClose

Related Products

Related Products