null
Zone

Zone 6.5" Lift Kit | For OEM Aluminum/Stamped Steel Control Arms | 14-18 Chevy/GMC Truck 2WD

(No reviews yet) Write a Review
SKU:
ZONC34-ZN
Shipping:
Calculated at Checkout
$847.90

Description

The 6.5'' system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 5'' blocks, u-bolts, and all the necessary hardware to complete the install.
Optional accessories for this lift kit include Zone front skid plate and rear add-a-leaf kit and are available separately. As with all Zone kits, this 6.5'' system is backed by Zone's limited lifetime warranty, FMVSS No.126 ESC system compliance, and 5-year 60,000-mile drivetrain protection through 560plus.com.

Notes

  • Factory 17" and 18" wheels will not fit after installation due to Tie Rod End interference.
  • Stock 20" wheels will only fit with a minimum 1/4" wheel spacer.
  • To reduce trimming required to fit a 20" wheel, a maximum backspacing of 5.75" is recommended.
  • This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).

Notes

  • Factory 17" and 18" wheels will not fit after installation due to Tie Rod End interference.
  • Stock 20" wheels will only fit with a minimum 1/4" wheel spacer.
  • To reduce trimming required to fit a 20" wheel, a maximum backspacing of 5.75" is recommended.
  • This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).

Crossmembers
Skid Plate
Differential Drop Brackets
CV Axle Spacers
Rear Lift Blocks and Hardware
Steering Knuckles
Sway Bar Relocation Brackets
Strut Spacers
The 6.5'' system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 5'' blocks, u-bolts, and all the necessary hardware to complete the install.
Optional accessories for this lift kit include Zone front skid plate and rear add-a-leaf kit and are available separately. As with all Zone kits, this 6.5'' system is backed by Zone's limited lifetime warranty, FMVSS No.126 ESC system compliance, and 5-year 60,000-mile drivetrain protection through 560plus.com.

Notes

  • Factory 17" and 18" wheels will not fit after installation due to Tie Rod End interference.
  • Stock 20" wheels will only fit with a minimum 1/4" wheel spacer.
  • To reduce trimming required to fit a 20" wheel, a maximum backspacing of 5.75" is recommended.
  • This Kit will only fit vehicles equipped with factory (Stamped Steel or Aluminum Control Arms).

View AllClose

Related Products

Related Products