null
Zone

Zone 6" Coil Spring Lift Kit | 09-13 Dodge/Ram 2500/3500 4WD Gas | 4" Rear Axle Diameter

(No reviews yet) Write a Review
SKU:
ZOND39-ZN
Shipping:
Calculated at Checkout
$988.80

Description

This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.
In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.

Notes

  • Does NOT fit 3500 trucks from 2013.
  • Check rear axle diameter before ordering.

Notes

  • Does NOT fit 3500 trucks from 2013.
  • Check rear axle diameter before ordering.
Coil Springs
Control Arm Relocation Brackets
Dropped Pitman Arm
Rear Lift Block and U-Bolts
Track Bar Relocation Bracket
Transfer Case Indexing Ring
Brake Line Brackets
This new Zone Offroad 6" suspension system for the 09-13 Dodge Ram 2500 & 09-12 Dodge Ram 3500 is performance packed and budget friendly for those looking to get 37" tires under their HD Dodge truck. The lift uses a unique control arm relocation design. Both the stock upper and lower arms are relocated to relieve angles, properly position the front axle and provide good caster and front pinion angle settings. The 1/4" steel constructed relocation brackets mount directly to stock locations and only require a few new holes to be drilled for extra support. No cutting of the frame or axle mounts is required. Stock alignment adjustability is retained. Stock control arm angles are maintained to provide a great ride, handling and control.
In addition to the control arm brackets, all the necessary additional components are included. Full-length coil springs, dropped pitman arm, track bar relocation, sway bar relocation and bump stops are included. The rear kits feature new lift blocks and u-bolts. A rear carrier bearing drop kit is available also for trucks featuring a stock 2-piece rear driveshaft.

Notes

  • Does NOT fit 3500 trucks from 2013.
  • Check rear axle diameter before ordering.
View AllClose

Additional Information

View AllClose