Zone
Zone 6" Strut Spacer Lift Kit | 09-11 Dodge/Ram 1500 4WD | 3" Rear Coil for Level Tail Rear End
- SKU:
- ZOND15-ZN
- Shipping:
- Calculated at Checkout
Description
The Zone Dodge Ram 1500 pickup 6" Suspension Kit System for 2009-2012 models is centered around two main crossmembers that are locked together with a substantial differential skid plate. CNC machined steering knuckle correct steering geometry while reducing installation time. Strut top spacers are used to lift the vehicle and maintain the factory ride. Strut dissaseembly is only required if the optional preload spacers included in the kit are used. The rear is lifted with new Zone coil springs, track bar relocation and a rear four link relocation system.
This kit comes with a 3" rear coil spring to achieve a level truck stance. If you wish to have a tail high stance, kit ZOND2 is supplied with a 5" coil spring, to raise the rear end higher than the front.
This kit comes with a 3" rear coil spring to achieve a level truck stance. If you wish to have a tail high stance, kit ZOND2 is supplied with a 5" coil spring, to raise the rear end higher than the front.
Notes
- This kit is not meant for TRX models due to differences in struts compared to standard trucks.
Notes
- This kit is not meant for TRX models due to differences in struts compared to standard trucks.
Control Arm Relocation Brackets
Differential Drop Brackets
Skid Plate
Steering Knuckles
Strut Spacers
Sway Bar Links
Tie Rod Ends
The Zone Dodge Ram 1500 pickup 6" Suspension Kit System for 2009-2012 models is centered around two main crossmembers that are locked together with a substantial differential skid plate. CNC machined steering knuckle correct steering geometry while reducing installation time. Strut top spacers are used to lift the vehicle and maintain the factory ride. Strut dissaseembly is only required if the optional preload spacers included in the kit are used. The rear is lifted with new Zone coil springs, track bar relocation and a rear four link relocation system.
This kit comes with a 3" rear coil spring to achieve a level truck stance. If you wish to have a tail high stance, kit ZOND2 is supplied with a 5" coil spring, to raise the rear end higher than the front.
This kit comes with a 3" rear coil spring to achieve a level truck stance. If you wish to have a tail high stance, kit ZOND2 is supplied with a 5" coil spring, to raise the rear end higher than the front.
Notes
- This kit is not meant for TRX models due to differences in struts compared to standard trucks.