null
Zone

Zone 6" Suspension System | 2009-2013 Ford F150 2WD

(No reviews yet) Write a Review
SKU:
ZONF20-ZN
Shipping:
Calculated at Checkout
$1,360.75

Description

Choose the Zone Offroad 6" Suspension System to lift your 2WD 2009-2013 Ford F150 and clear up to a 37" tire. Competitors will tell you how they maintain the factory ride, but Zone Offroad has stepped up the game by including new coil-over struts custom valved for larger tires, improved ride, and optimal handling.

Visually compare the Zone Offroad porterhouse knuckles to the chuck roast of the competition. Salivate over the fully cast, CNC machined, and resonant frequency tested knuckles that correct the tie rod and ball joint geometry with no track width change. Heavy main crossmembers are included with your meal. Choose your side of rear shock, and we'll fill in the rest with a 5" dual pin block kit that offsets the axle closer to the center of the wheel well compared to a standard setup.

This kit is all inclusive, so don't look anywhere else, install a Zone Offroad system on your 2WD F150 and have no regrets.

Quick Specs:
  • Front Lift Height: 6"
  • Front Lift Method: IFS w/Struts
  • Rear Lift Height: 5"
  • Rear Lift Method: Block & U-bolt Kit
  • Install Time Hrs: 8
  • Difficulty Level 1-5: 3
  • Wheel Size: 18 x 9
  • Back Spacing: 5"
  • Max Tire Size: 37 x 12.50
  • Wheel Size: 18x9
  • Back Spacing: 4.5"-5"
  • Max Tire Size: 35 x 13.50
  • Wheel Size: 20 x 9
  • Back Spacing: 5"-5.5"
  • Max Tire Size: 37 x 12.50

Features


  • Custom Valved Replacement Coil-over Strut
  • CNC Machined Steering Knuckles correctly drilled for the application
  • Heavy 1/4" thick crossmembers
  • No Track Width Change

Notes


  • Vehicles equipped with factory powersteps will require E-Brake Relocation Bracket F5608 listed in the accessories.
  • Will not work with 17" wheels.
  • If using 18x9 wheels with 5.5" backspace, fit the wheels before mounting to check for proper tie rod clearance. Wheel manufacturing variances may affect this clearance.
  • Certain models with a 2-piece rear driveshaft may require carrier bearing drop kit D5405.
  • Although rare, rear driveshaft extension part # F5601 may be required.
  • Kit includes a 5" rear block kit (#F2619) that typically nets a slight tail high stance. A 4" rear block kit (#F2419) is available in the options if a more level stance is preferred.
  • Will not fit Raptor models


Choose the Zone Offroad 6" Suspension System to lift your 2WD 2009-2013 Ford F150 and clear up to a 37" tire. Competitors will tell you how they maintain the factory ride, but Zone Offroad has stepped up the game by including new coil-over struts custom valved for larger tires, improved ride, and optimal handling.

Visually compare the Zone Offroad porterhouse knuckles to the chuck roast of the competition. Salivate over the fully cast, CNC machined, and resonant frequency tested knuckles that correct the tie rod and ball joint geometry with no track width change. Heavy main crossmembers are included with your meal. Choose your side of rear shock, and we'll fill in the rest with a 5" dual pin block kit that offsets the axle closer to the center of the wheel well compared to a standard setup.

This kit is all inclusive, so don't look anywhere else, install a Zone Offroad system on your 2WD F150 and have no regrets.

Quick Specs:
  • Front Lift Height: 6"
  • Front Lift Method: IFS w/Struts
  • Rear Lift Height: 5"
  • Rear Lift Method: Block & U-bolt Kit
  • Install Time Hrs: 8
  • Difficulty Level 1-5: 3
  • Wheel Size: 18 x 9
  • Back Spacing: 5"
  • Max Tire Size: 37 x 12.50
  • Wheel Size: 18x9
  • Back Spacing: 4.5"-5"
  • Max Tire Size: 35 x 13.50
  • Wheel Size: 20 x 9
  • Back Spacing: 5"-5.5"
  • Max Tire Size: 37 x 12.50

Features


  • Custom Valved Replacement Coil-over Strut
  • CNC Machined Steering Knuckles correctly drilled for the application
  • Heavy 1/4" thick crossmembers
  • No Track Width Change

Notes


  • Vehicles equipped with factory powersteps will require E-Brake Relocation Bracket F5608 listed in the accessories.
  • Will not work with 17" wheels.
  • If using 18x9 wheels with 5.5" backspace, fit the wheels before mounting to check for proper tie rod clearance. Wheel manufacturing variances may affect this clearance.
  • Certain models with a 2-piece rear driveshaft may require carrier bearing drop kit D5405.
  • Although rare, rear driveshaft extension part # F5601 may be required.
  • Kit includes a 5" rear block kit (#F2619) that typically nets a slight tail high stance. A 4" rear block kit (#F2419) is available in the options if a more level stance is preferred.
  • Will not fit Raptor models


View AllClose

Additional Information

View AllClose

Related Products

Related Products