Artec Superduty Crossover Steering Kit - SK1404

TECHNICAL DETAILS

• Superduty Crossover Steering Kit with 7/8" JMX rod ends
• Specifically for SuperDuty Crossover Weld-on High Steer Arms
• 2 RH and 2 LH - JMX 7/8" x 7/8" bore rod end for drag link
• 2 RH and 2 LH - 7/8" x 14 tpi WRENCH FLAT tube adapters for 1.5" OD .250" wall tubing
• 2 RH and 2 LH - 7/8" x 14 tpi Jam Nuts
• 8 - 7/8" x 3/4" bore high misalignment spacers
• 1 - 1.5" OD x .250" wall 1026 DOM tubing 48" long for drag link
• 1 - 1.5" OD x .250" wall 1026 DOM tubing 54" long for tie rod
• This kit will provide a drag link up to 54 inches long total, and a tie rod up to 59 inches long total
• Note: Tubing needs to be cut to length