Currie Enterprises High Pinion HD60 Front Axle with 5.38 Gears and Eaton E-Locker - CE-LF6400E53

PRODUCT OVERVIEW

The Currie HD60 high-pinion front axle for the 2018 - current Wrangler JL & 2020 - current Gladiator JT delivers next-level strength and reliability. The HD60 features a massively reinforced rotated 60 series center section, 3.5-inch tubes, chromoly axles, and heavy-duty forged JL/Gladiator inner knuckles that accept the factory outer steering and brake assemblies. Upgrade to an HD60 and start enjoying your off-road adventures without the worry of frontend failure.

Notes:

Tie Rod: The HD60 housing requires the use of a high-clearance aftermarket tie rod to prevent tie rod/housing interference at full turn. JL/JT Rubicon compatible High-clearance tie rods are available from Steer Smarts (Yeti XD P/N 78088001)

ABS Sensors: The factory ABS sensors from the stock axle must be retained and installed on the Currie HD 60 housing

Computer Programming: Vehicles require a computer programmer to reset the gear ratio and tire height in the vehicle's computer for the proper function of the vehicles stability control and transmission shift points

Steering Stabilizer: The HD60 Ram assist bracket requires an aftermarket stud style trac bar bolt to accommodate a steering stabilizer. Trac bar bolts are available from FOX Racing P/N 803-02-028 or Synergy Manufacturing P/N 8806-01